-
Elpress products
- Crimping tools
-
Cu terminals
- Tube terminals 0.75 - 10 mm²
- KRF tube terminals 16 - 800 mm²
- KRF tube terminals with two holes
- KRFS tube terminals 50 - 400 mm² with narrow palm
- KRF angled terminals 45°
- KRF angled terminals 90°, 10 - 185 mm²
- KRF tube terminals (NS)
- KS/KSF through connectors 0.75 - 800 mm²
- KS/KSF through connectors with partition 10-500 mm²
- KRD tube terminals 16 - 1000 mm²
- KSD through connectors 16 - 1000 mm²
- KRT tube terminals 10 - 500 mm²
- KST through connectors 10 - 500 mm²
- DIN 46235 tube terminals 6-400 mm²
- KSxP parallel connectors for conductors total 0.5 - 6.75 mm²
- KSxP parallel connectors for conductors total 10 - 630 mm²
- CUT through connectors for single strand conductors 6 - 16 mm²
- KRX tube terminals for Excel and Fxcel cable 10 - 16 mm²
- KSX through connectors for Excel and Fxcel cable 10 - 16 mm²
- DIN 46230 pin terminals 10 - 95 mm²
- DIN 46234 sheet metal terminals 10 - 185 mm²
- AlCu terminals
- Al terminals
- C sleeves
-
Pre-insulated terminals
- Pin terminals 0.1 - 6 mm²
- Ring terminals 0.1 - 6 mm²
- Fork terminals 0.1 - 6 mm²
- Flanged fork terminals 0.5 - 2.5 mm²
- Hook terminals 0.5 - 2.5 mm²
- Blade terminals 0.25 - 6 mm²
- Through connectors 0.25 - 6 mm²
- Through connectors with heat shrink insulation 0.5 - 6 mm²
- Parallel through connectors 0.5 - 6 mm²
- Receptacles, rolled type 0.1 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles fully insulated rolled type 0.5 - 6 mm²
- Tabs 0.5 - 6 mm²
- End connector sleeves fully insulated 1 - 6 mm²
- Bullet 0.25 - 6 mm²
- End connector sleeves fully insulated 0.25 - 6 mm²
-
Un-insulated terminals
- Ring terminal 0.25 - 6 mm²
- Fork terminals 0.25 - 10 mm²
- Pin terminals 0.25 - 6 mm²
- Jointing sleeves 0.75 - 10 mm²
- Receptacles rolled type 0.5 - 6 mm²
- Receptacles with locking lip rolled type 0.5 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles 90° rolled type 0.5 - 1.5 mm²
- Receptacle angled rolled type 0.5 - 1 mm²
- Tab 0.5 - 2.5 mm²
- Tab with locking lip 0.5 - 6 mm²
- Bullet and Socket 0.2 - 1.5 mm²
- Connector block for receptacles 1.5 - 6 mm²
- Connector block for bullets and sockets 0.2 - 1.5 mm²
- Connector block for receptacles - 400V/18A
- Tab connectors
- Tab connector 45°
- Tab connector 90°
- Tab connector 2 x 45°
- Tabs 1, 2 and 3 male
- Tabs for soldering
- Insulation boots
-
End terminals
- Pre-insulated end terminals 0.14 - 50 mm² ET, standard colour
- Pre-insulated end terminals 0.14 - 50 mm² ETT, alternative colour
- Pre-insulated end terminals 0.14 - 50 mm² ETD, alternative colour
- Uninsulated end terminals 0.25 - 50 mm²
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ET2, standard colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETT2, alternative colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETW2, alternative colour code
- Assortment boxes
- Cutting and stripping tools
- Deep earthing
-
Shearbolt connectors
- Shearbolt connectors 10 - 240 mm² (pre-assembled screw)
- Shearbolt terminals 10 - 630 mm² (reversible screw)
- Shearbolt connectors with heat shrink insulation, 1kV
- Shearbolt terminals 10 - 630 mm² (pre-assembled screw)
- Shearbolt connectors 10 - 630 mm² (reversible screw)
- Screw branch clamps
- Filler piece
- Overhead line connectors
- Cable clamps
- Cable joint and terminal
- Earth braids
-
Dies, matrices, punches
-
Dies
- Dies for PVL1300S/P
- MB-dies
- TB-dies
- B-dies KRF/KSF/KRD/KSD/KRT/KST
- Dual dies for 1300-systemet (13 t)
- Dual-dies for 1300C2-systemet（13 t）
- Integrated dies 1300-system
- Integrated dies for 1300C2 (13 t)
- Die holders 1300-system (13 t)
- Die holders 1300C2 (13 t)
- DUAL-dies for 250-system (25 t)
- Integrated dies for 250-system (25 t)
- Die holders for 250-system
- Dies for CS2500
- Integrated dies V1470
- B-dies for AlMgSi and Al59
- Elpress Mobile dies
- B-dies for c-sleeves
- Matrices
- Punches
-
Dies
- Elpress catalogues
- System Elpress
- System solutions
Preventive maintenance agreement ensures the quality of your jointing
Elpress service agreements provide higher operational reliability and increased security through periodic inspections of the press equipment. The control means that the risk of unforeseen downtime is minimized by identifying any safety issues or malfunctions, and recommending measures to avoid these problems.
As a contract customer, you always get a 10% discount on regular spare parts prices and in the event of a queue formation at our service department, you as a contract customer are always given priority.
Elpress service agreements are arranged per product, tool and service level:
• Elpress Basic
• Elpress Advanced
Elpress Basic - Preventive Maintenance
- General inspection of the tool
- Function test
- Calibration and issue of Certificate
Elpress Advanced - Corrective Maintenance
- General inspection of the tool
- Function test
- Calibration and issue of Certificate
- Free replacement of worn parts at the time of service.
Read about how Elpress takes care of your personal information (GDPR)
Read about Elpress service agreements
For customers in UK, USA, and South America please contact our service partners:
UK https://etechcomponents.com/service/
USA www.precisionhydraulics.com
South America http://www.automec.ind.br/site/
For customers based outside the EU, contact Elpress Service, +46 612 71 71 81, or your nearest Elpress service partner.
By filling in the form below, you agree to the terms of the Elpress Service and Maintenance Agreement and Orgalime M2000, general conditions for maintenance.
