Elpress has cable joints for low voltage 1 kV with heat-shrink insulation. The insulation is made of polyolefin and the joint bodies are internally coated with glue that melts upon heating at the same time that the joint bodies shrink. When the glue is pressed forward out of the shrunken body, the installation is finished and the joint becomes entirely watertight. There are kits for 3-, 4- and 5-conductor cables.
A system with screw terminals, Click & Heat, which goes from 10 to 240 mm² divided into 4 kits where everything is included. Adapted for stranded and solid aluminum and copper cable, round and sector-shaped conductors, which do not need to be round-shaped.
Click here for leaflet on click & heat
A system with crimping sleeves that takes several areas, Crimp & Heat, which is mainly to joint 4G or 5G cable of stranded 16-25 mm² Al and make joints to 10-16 mm² Cu in Class 1, 2, 5 or 6. Elpress hand pliers EW1025 or TB-dies TBKA9-11.5 together with a suitable Elpress tool are used to make the joint. Meets the requirements as per SS-EN50393.
Click here for product sheet on crimp & heat
Kit for splicing 4- or 5G cable of stranded Al-conductor 16-25 mm² according to IEC60228, and for splicing or transitioning to Cu 10-16 mm² class 1, 2, 5 or 6.Meets the requirements in SS-EN 50393, EBR KJ 24:89
Joint kit for splicing Al conductors 50-240 mm². MultiCrimp Indent crimping for low voltage applications (1 kV) according to IEC 60228, with the 1300-system.
System Elpress symbolises Elpress’ guiding principles of safety and quality. These principles are reflected in our certified solutions, training courses and preventive maintenance in the form of service.
No ads consent given, to see video, enable ads consent