Products
-
Elpress products
- Crimping tools
-
Cu terminals
- Tube terminals 0.75 - 10 mm²
- KRF tube terminals 16 - 800 mm²
- KRF tube terminals with two holes
- KRFS tube terminals 50 - 400 mm² with narrow palm
- KRF angled terminals 45°
- KRF angled terminals 90°, 10 - 185 mm²
- KRF tube terminals (NS)
- KS/KSF through connectors 0.75 - 800 mm²
- KS/KSF through connectors with partition 10-500 mm²
- KRD tube terminals 16 - 1000 mm²
- KSD through connectors 16 - 1000 mm²
- KRT tube terminals 10 - 500 mm²
- KST through connectors 10 - 500 mm²
- DIN 46235 tube terminals 6-400 mm²
- KSxP parallel connectors for conductors total 0.5 - 6.75 mm²
- KSxP parallel connectors for conductors total 10 - 630 mm²
- CUT through connectors for single strand conductors 6 - 16 mm²
- KRX tube terminals for Excel and Fxcel cable 10 - 16 mm²
- KSX through connectors for Excel and Fxcel cable 10 - 16 mm²
- DIN 46230 pin terminals 10 - 95 mm²
- DIN 46234 sheet metal terminals 10 - 185 mm²
- AlCu terminals
- Al terminals
- C sleeves
-
Pre-insulated terminals
- Pin terminals 0.1 - 6 mm²
- Ring terminals 0.1 - 6 mm²
- Fork terminals 0.1 - 6 mm²
- Flanged fork terminals 0.5 - 2.5 mm²
- Hook terminals 0.5 - 2.5 mm²
- Blade terminals 0.25 - 6 mm²
- Through connectors 0.25 - 6 mm²
- Through connectors with heat shrink insulation 0.5 - 6 mm²
- Parallel through connectors 0.5 - 6 mm²
- Receptacles, rolled type 0.1 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles fully insulated rolled type 0.5 - 6 mm²
- Tabs 0.5 - 6 mm²
- End connector sleeves fully insulated 1 - 6 mm²
- Bullet 0.25 - 6 mm²
- End connector sleeves fully insulated 0.25 - 6 mm²
-
Un-insulated terminals
- Ring terminal 0.25 - 6 mm²
- Fork terminals 0.25 - 10 mm²
- Pin terminals 0.25 - 6 mm²
- Jointing sleeves 0.75 - 10 mm²
- Receptacles rolled type 0.5 - 6 mm²
- Receptacles with locking lip rolled type 0.5 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles 90° rolled type 0.5 - 1.5 mm²
- Receptacle angled rolled type 0.5 - 1 mm²
- Tab 0.5 - 2.5 mm²
- Tab with locking lip 0.5 - 6 mm²
- Bullet and Socket 0.2 - 1.5 mm²
- Connector block for receptacles 1.5 - 6 mm²
- Connector block for bullets and sockets 0.2 - 1.5 mm²
- Connector block for receptacles - 400V/18A
- Tab connectors
- Tab connector 45°
- Tab connector 90°
- Tab connector 2 x 45°
- Tabs 1, 2 and 3 male
- Tabs for soldering
- Insulation boots
-
End terminals
- Pre-insulated end terminals 0.14 - 50 mm² ET, standard colour
- Pre-insulated end terminals 0.14 - 50 mm² ETT, alternative colour
- Pre-insulated end terminals 0.14 - 50 mm² ETD, alternative colour
- Uninsulated end terminals 0.25 - 50 mm²
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ET2, standard colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETT2, alternative colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETW2, alternative colour code
- Assortment boxes
- Cutting and stripping tools
- Deep earthing
-
Shearbolt connectors
- Shearbolt connectors 10 - 240 mm² (pre-assembled screw)
- Shearbolt terminals 10 - 630 mm² (reversible screw)
- Shearbolt connectors with heat shrink insulation, 1kV
- Shearbolt terminals 10 - 630 mm² (pre-assembled screw)
- Shearbolt connectors 10 - 630 mm² (reversible screw)
- Screw branch clamps
- Filler piece
- Overhead line connectors
- Cable clamps
- Cable joint and terminal
- Earth braids
-
Dies, matrices, punches
-
Dies
- Dies for PVL1300S/P
- MB-dies
- TB-dies
- B-dies KRF/KSF/KRD/KSD/KRT/KST
- Dual dies for 1300-systemet (13 t)
- Dual-dies for 1300C2-systemet（13 t）
- Integrated dies 1300-system
- Integrated dies for 1300C2 (13 t)
- Die holders 1300-system (13 t)
- Die holders 1300C2 (13 t)
- DUAL-dies for 250-system (25 t)
- Integrated dies for 250-system (25 t)
- Die holders for 250-system
- Dies for CS2500
- Integrated dies V1470
- B-dies for AlMgSi and Al59
- Elpress Mobile dies
- B-dies for c-sleeves
- Matrices
- Punches
-
Dies
- Elpress catalogues
- System Elpress
- System solutions
