KRFS tube terminals 50 - 400 mm² with narrow palm
Material: Cu 99.95%, tin plated Cu/Sn.Inspection holeFor stranded (class 2), multi-stranded (class 5) and very flexible (class 6) Cu conductors according to IEC 60228.For class 5 and class 6 Cu conductors Elpress recommends the Dual system.Easy to install via cable gland, allows for pre-installation.The width of the palm is less than or as wide as the neck.UL-approved, DNV approved.Example of marking KRFS: 17 (neck) Elpress logotype 70 10F (palm)17 = Die no. 70 = mm² 10 = palm hole for M10 F = type KRF for class 2, 5 and 6 conductors.
Articles
| Cat. No. | Area mm² | CuAWG/MCM | d | D | N | N1 | L1 | L | W | s | t | Screw | Die no. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KRFS50-6 | 50 | 1/0 AWG | 11 | 14,5 | 11 | 11.5 | 40 | 51 | 15 | 19 | 4 | M6 | 14,5 |
| KRFS50-8 | 50 | 1/0 AWG | 11 | 14,5 | 11 | 11.5 | 40 | 51 | 16.5 | 19 | 3.8 | M8 | 14,5 |
| KRFS50-10 | 50 | 1/0 AWG | 11 | 14,5 | 11 | 12.5 | 41 | 52 | 16.5 | 19 | 3.8 | M10 | 14,5 |
| KRFS70-6 | 70 | 2/0 AWG | 13 | 17 | 11 | 12.5 | 47 | 58 | 17 | 22 | 4.5 | M6 | 17 |
| KRFS70-8 | 70 | 2/0 AWG | 13 | 17 | 11 | 12.5 | 47 | 58 | 17 | 22 | 4.5 | M8 | 17 |
| KRFS70-10 | 70 | 2/0 AWG | 13 | 17 | 11 | 12.5 | 47 | 58 | 19 | 22 | 3.9 | M10 | 17 |
| KRFS95-6 | 95 | 3/0 AWG | 15 | 20 | 11 | 14 | 52 | 63 | 19 | 25 | 5.7 | M6 | 20 |
| KRFS95-8 | 95 | 3/0 AWG | 15 | 20 | 11 | 14 | 52 | 63 | 19 | 25 | 5.7 | M8 | 20 |
| KRFS95-10 | 95 | 3/0 AWG | 15 | 20 | 11 | 14 | 52 | 63 | 19 | 25 | 5.7 | M10 | 20 |
| KRFS95-12 | 95 | 3/0 AWG | 15 | 20 | 12 | 15 | 52 | 64 | 20 | 25 | 5.4 | M12 | 20 |
| KRFS120-6 | 120 | 4/0 AWG | 17 | 22 | 11 | 13.5 | 56 | 67 | 19 | 27 | 5.9 | M6 | 22 |
| KRFS120-8 | 120 | 4/0 AWG | 17 | 22 | 11 | 13.5 | 56 | 67 | 19 | 27 | 5.9 | M8 | 22 |
| KRFS120-10 | 120 | 4/0 AWG | 17 | 22 | 11 | 13.5 | 56 | 67 | 19 | 27 | 5.9 | M10 | 22 |
| KRFS120-12 | 120 | 4/0 AWG | 17 | 22 | 12 | 15 | 58 | 70 | 22 | 27 | 5 | M12 | 22 |
| KRFS150-6 | 150 | 300 MCM | 19 | 25 | 11 | 14 | 63 | 74 | 25 | 32 | 6.3 | M6 | 25 |
| KRFS150-8 | 150 | 300 MCM | 19 | 25 | 11 | 14 | 63 | 74 | 25 | 32 | 6.3 | M8 | 25 |
| KRFS150-10 | 150 | 300 MCM | 19 | 25 | 11 | 14 | 63 | 74 | 25 | 32 | 6.3 | M10 | 25 |
| KRFS150-12 | 150 | 300 MCM | 19 | 25 | 12 | 15 | 64 | 76 | 25 | 32 | 6.3 | M12 | 25 |
| KRFS185-10 | 185 | 350 MCM | 21 | 27 | 11 | 13 | 68 | 79 | 27 | 37 | 6.6 | M10 | 27 |
| KRFS185-12 | 185 | 350 MCM | 21 | 27 | 12 | 15 | 70 | 82 | 27 | 37 | 6.6 | M12 | 27 |
| KRFS240A-10 | 240 | 450 MCM | 22.5 | 29 | 15 | 19 | 76 | 91 | 29 | 37 | 7.7 | M10 | 30 |
| KRFS240A-12 | 240 | 450 MCM | 22.5 | 29 | 15 | 19 | 76 | 91 | 29 | 37 | 7.7 | M12 | 30 |
| KRFS240A-16 | 240 | 450 MCM | 22.5 | 29 | 20 | 19 | 76 | 96 | 29 | 37 | 7.7 | M16 | 30 |
| KRFS300A-10 | 300 | 550 MCM | 24.5 | 31,5 | 15 | 19 | 79 | 94 | 31 | 40 | 8.6 | M10 | 32 |
| KRFS300A-12 | 300 | 550 MCM | 24.5 | 31,5 | 15 | 19 | 79 | 94 | 31 | 40 | 8.6 | M12 | 32 |
| KRFS300A-16 | 300 | 550 MCM | 24.5 | 31,5 | 20 | 19 | 79 | 99 | 31 | 40 | 8.6 | M16 | 32 |
| KRFS400A-12 | 400 | 700 MCM | 30 | 38 | 15 | 24 | 99 | 114 | 38 | 52 | 8.8 | M12 | 38 |
| KRFS400A-16 | 400 | 700 MCM | 30 | 38 | 20 | 39 | 94 | 114 | 38 | 52 | 8.8 | M16 | 38 |
- s = strip length
- t = palm thickness