Products
-
Elpress products
-
Pre-insulated terminals
- Ring terminals 0.1 - 6 mm²
- Fork terminals 0.1 - 6 mm²
- Flanged fork terminals 0.5 - 2.5 mm²
- Hook terminals 0.5 - 2.5 mm²
- Pin terminals 0.1 - 6 mm²
- Blade terminals 0.25 - 6 mm²
- Through connectors 0.25 - 6 mm²
- Through connectors with heat shrink insulation 0.5 - 6 mm²
- Parallel through connectors 0.5 - 6 mm²
- Receptacles, rolled type 0.1 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles fully insulated rolled type 0.5 - 6 mm²
- Tabs 0.5 - 6 mm²
- End connector sleeves fully insulated 1 - 6 mm²
- Bullet 0.25 - 6 mm²
- End connector sleeves fully insulated 0.25 - 6 mm²
-
End sleeves
- Pre-insulated end terminals 0.14 - 50 mm² ET, standard colour
- Pre-insulated end terminals 0.14 - 50 mm² ETT, alternative colour
- Pre-insulated end terminals 0.14 - 50 mm² ETD, alternative colour
- Uninsulated end terminals 0.25 - 50 mm²
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ET2, standard colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETT2, alternative colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETW2, alternative colour code
-
Un-insulated terminals
- Ring terminal 0.25 - 6 mm²
- Fork terminals 0.25 - 10 mm²
- Pin terminals 0.25 - 6 mm²
- Jointing sleeves 0.75 - 10 mm²
- Receptacles rolled type 0.5 - 6 mm²
- Receptacles with locking lip rolled type 0.5 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles 90° rolled type 0.5 - 1.5 mm²
- Receptacle angled rolled type 0.5 - 1 mm²
- Tab 0.5 - 2.5 mm²
- Tab with locking lip 0.5 - 6 mm²
- Bullet and Socket 0.2 - 1.5 mm²
- Tab connectors
- Tab connector 45°
- Tab connector 90°
- Tab connector 2 x 45°
- Connector block for receptacles 1.5 - 6 mm²
- Connector block for bullets and sockets 0.2 - 1.5 mm²
- Connector block for receptacles - 400V/18A
- Tabs 1, 2 and 3 male
- Insulation boots
- Tabs for soldering
- Assortment boxes
-
Cu terminals
- Tube terminals 0.75 - 10 mm²
- KRF tube terminals 16 - 800 mm²
- KRF tube terminals with two holes, 16 - 400 mm²
- KRFS tube terminals 50 - 400 mm² with narrow palm
- KRFN tube terminals 50 - 240 mm² with narrow palm
- KRF angled terminals 45°, 10 - 150 mm²
- KRF angled terminals 90°, 10 - 185 mm²
- KRD tube terminals 16 - 1000 mm²
- KRT tube terminals 10 - 500 mm²
- DIN 46235 tube terminals 6 - 1000 mm²
- DIN 46234 sheet metal terminals 10 - 185 mm²
- KS/KSF through connectors 0.75 - 800 mm²
- KS/KSF through connectors with partition 10-500 mm²
- KSxP parallel connectors for conductors total 0.5 - 6.75 mm²
- KSxP parallel connectors for conductors total 10 - 630 mm²
- CUT through connectors for single strand conductors 6 - 16 mm²
- KSD through connectors 16 - 1000 mm²
- KST through connectors 10 - 500 mm²
- DIN 46230 pin terminals 10 - 95 mm²
- KRX tube terminals for Excel and Fxcel cable 10 - 16 mm²
- KSX through connectors for Excel and Fxcel cable 10 - 16 mm²
- Al terminals
- AlCu terminals
- C sleeves
- Overhead line connectors
- Shearbolt connectors
- Cable joint and terminal
- Crimping tools
- Cutting and stripping tools
- Deep earthing
- Earth braids
- Cable clamps
-
Pre-insulated terminals
- System Elpress
PL800ET with tools
Elpress assortment boxes for professional use.
Properties:
- made of polypropylene, insert made of polystyrene
- 11 compartments
- 800 pre-insulated end sleeves 0.5-16 mm² type ET, colour code W
- stripping tool SCT001
Articles
| Cat. No. | Gross weight kg |
|---|---|
| PL800ET-PEB0116H | 0,993 |
| PL800ET-PEB0116S | 0 |