FBS1722

• a knob sets the depth of cut between 0 and 1.2 mm in 0.1 mm increments
• stripping can be done up to 25 mm from the edge of the screening and the PEX surface becomes very even
• the blade is hardened, min HRC 55, and specially ground, as well as very easy to replace

Stripping tool for fixed, outer conductive layers on PEX cables. Stripping can be carried out from Ø 10 to Ø 50 mm, which corresponds to up to 800 mm² at 12 kV, 630 mm² at 24 kV and 500 mm² at 36 kV.