Skip to content

Productos
- - - Cu terminals
      The terminals for Cu conductors 0.75 mm² to 1000 mm² are made of copper 99.9%. As a standard, we manufacture tube terminals (type KR/KRF/KRD/KRT), through connectors (type KS/KSF/KSD/KST) and C sleeves, but also largely customised connectors. The Elpress system fits both stranded conductors, as per IEC 60228 class 2, and flexible conductors as per IEC 60228 class 5 and class 6.
      
      AlCu terminals
      Elpress AlCu terminals for Al conductors are made of solid material.
      
      Al terminals
      Elpress terminals for Al conductors 16 mm² to 1200 mm² are made of solid aluminium 99.7%.
      
      C sleeves
      Branching sleeves for Cu conductors 6-300 mm², made of copper 99.95%.
      
      Pre-insulated terminals
      Elpress’ pre-insulated terminal consist of ring, fork and pin terminals made of copper and flat and round pin terminals of brass or tin bronze.
      
      Un-insulated terminals
      Elpress uninsulated connections up to 10 mm² consists of through connectors, rings, ferrules, forks and pin terminals made of electrolytic copper.
      
      End terminals
      Elpress pre-insulated and uninsulated end terminals are made of tin-plated copper.
      
      Overhead line connectors
      Elpress has a programme for overhead line joints that comprises products for copper lines, alloyed aluminium lines of type AlMgSi (Super B) and Al59 and FeAl lines.
      
      Shearbolt connectors
      Shearbolt connectors are intended for stranded and solid aluminium and copper cable, low voltage and medium voltage up to 36 kV.
      
      Mechanical hand tools
      Mechanical hand tools for crimping 0,14-120 mm².
      
      3,5 t system
      Electrohydraulic, electromechanical and hydraulic hand tools with up to 3.5 tons of pressing force.
      
      6 t system
      Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 6 tons of crimp force.
      
      13 t system
      Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 13 tons of crimp force.
      
      25 t system
      Crimping heads with up to 25 tons of crimp force.
      
      35 t system
      Crimping heads with up to 35 tons of crimp force.
      
      40 t system
      Crimping heads with up to 40 tons of crimp force.
      
      Hydraulic pumps
      Hydraulic foot pump and mains and battery operated pumps.
      
      Crimp stations and table stands
      Crimp stations for industrial crimping. Table stands designed for operators with high frequency use of the C2 crimp head.
      
      Dies, matrices and punches
      
      Elpress Stripping tools
      
      Cutting tools
      
      Elpress Combination tool for cutting and stripping
      
      Hydraulic cable cutters
      
      Assortment boxes
      
      Cable joint and terminal
      
      Cable clamps (cleats)
      
      Cable Cleats
      Engineered for Safety, Performance, and Reliability in Cable Management. You can find the products in the digital catalogue below. To order products, please contact your local Elpress Salesperson.
      
      Deep earthing system FS
      Accessories for depth earthing, tip, leading rod, extension rod, withdrawal handle and driving cap.
      
      Deep earthing system FSHD
      Accessories for depth earthing, tip, leading rod andextension rod. For hard and stony soils.
      
      Driving studs for FS/FSHD
      Driving studs for Elpress deep earthing system, specially designed for use with the FS21 and FS31 rod.
System Elpress
Key Industries
Support
Quiénes somos

ES
- EN
- ES
- DE
- DA
- FI
- NO
- SV
- US
- IN
- PL
- CN

Búsqueda de productos

Categories list

Electrical Machines
- Distribution transformers
  - Tools
    - Dies
      - Dies 6-ton system
        Pre-rounding for Cu
        Crimping tool for Cu
        Pre-rounding for Al
        Crimping tool for Al
      - Dies 13-ton system
        Pre-rounding for Cu
        Crimping tool for Cu
        Pre-rounding for Al
        Crimping tool for Al
  - Terminals
- Power Transformers
  - Tools
  - Terminals
    - Cu terminals
    - AlCu terminals
      - Al-Cu bimetallic through connectors 10 - 240 mm²

Storage box for system 1300

Nombre

LV1300L-ADV

Seguir leyendo Añadir al carrito

LV1300L-ADV

Elpress AB
Box 186
SE-872 24 Kramfors
Suecia

ES
- EN
- ES
- DE
- DA
- FI
- NO
- SV
- US
- IN
- PL
- CN

Productos
System Elpress
Key Industries
Support
Quiénes somos

Quiénes somos Elpress News innovaciones Casos de clientes Global distribution

Error: Formulario de contacto no encontrado.

ES
- EN
- ES
- DE
- DA
- FI
- NO
- SV
- US
- IN
- PL
- CN

Products

Cu terminals
The terminals for Cu conductors 0.75 mm² to 1000 mm² are made of copper 99.9%. As a standard, we manufacture tube terminals (type KR/KRF/KRD/KRT), through connectors (type KS/KSF/KSD/KST) and C sleeves, but also largely customised connectors. The Elpress system fits both stranded conductors, as per IEC 60228 class 2, and flexible conductors as per IEC 60228 class 5 and class 6.
AlCu terminals
Elpress AlCu terminals for Al conductors are made of solid material.
Al terminals
Elpress terminals for Al conductors 16 mm² to 1200 mm² are made of solid aluminium 99.7%.
C sleeves
Branching sleeves for Cu conductors 6-300 mm², made of copper 99.95%.
Pre-insulated terminals
Elpress’ pre-insulated terminal consist of ring, fork and pin terminals made of copper and flat and round pin terminals of brass or tin bronze.
Un-insulated terminals
Elpress uninsulated connections up to 10 mm² consists of through connectors, rings, ferrules, forks and pin terminals made of electrolytic copper.
End terminals
Elpress pre-insulated and uninsulated end terminals are made of tin-plated copper.
Overhead line connectors
Elpress has a programme for overhead line joints that comprises products for copper lines, alloyed aluminium lines of type AlMgSi (Super B) and Al59 and FeAl lines.
Shearbolt connectors
Shearbolt connectors are intended for stranded and solid aluminium and copper cable, low voltage and medium voltage up to 36 kV.
Mechanical hand tools
Mechanical hand tools for crimping 0,14-120 mm².
3,5 t system
Electrohydraulic, electromechanical and hydraulic hand tools with up to 3.5 tons of pressing force.
6 t system
Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 6 tons of crimp force.
13 t system
Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 13 tons of crimp force.
25 t system
Crimping heads with up to 25 tons of crimp force.
35 t system
Crimping heads with up to 35 tons of crimp force.
40 t system
Crimping heads with up to 40 tons of crimp force.
Hydraulic pumps
Hydraulic foot pump and mains and battery operated pumps.
Crimp stations and table stands
Crimp stations for industrial crimping. Table stands designed for operators with high frequency use of the C2 crimp head.
Dies, matrices and punches
Elpress Stripping tools
Cutting tools
Elpress Combination tool for cutting and stripping
Hydraulic cable cutters
Assortment boxes
Cable joint and terminal
Cable clamps (cleats)
Deep earthing system FS
Accessories for depth earthing, tip, leading rod, extension rod, withdrawal handle and driving cap.
Deep earthing system FSHD
Accessories for depth earthing, tip, leading rod andextension rod. For hard and stony soils.
Driving studs for FS/FSHD
Driving studs for Elpress deep earthing system, specially designed for use with the FS21 and FS31 rod.

Storage box for system 1300

LV1300L-ADV