-
Elpress products
-
Cu terminals
- Tube terminals 0.75 - 10 mm²
- KRF tube terminals 16 - 800 mm²
- KRF tube terminals with two holes, 16 - 400 mm²
- KRFS tube terminals 50 - 400 mm² with narrow palm
- KRFN tube terminals 50 - 240 mm² with narrow palm
- KRF angled terminals 45°
- KRF angled terminals 90°, 10 - 185 mm²
- KRF tube terminals (NS)
- KRD tube terminals 16 - 1000 mm²
- KRT tube terminals 10 - 500 mm²
- DIN 46235 tube terminals 6 - 1000 mm²
- DIN 46234 sheet metal terminals 10 - 185 mm²
- KS/KSF through connectors 0.75 - 800 mm²
- KS/KSF through connectors with partition 10-500 mm²
- KSxP parallel connectors for conductors total 0.5 - 6.75 mm²
- KSxP parallel connectors for conductors total 10 - 630 mm²
- CUT through connectors for single strand conductors 6 - 16 mm²
- KSD through connectors 16 - 1000 mm²
- KST through connectors 10 - 500 mm²
- DIN 46230 pin terminals 10 - 95 mm²
- KRX tube terminals for Excel and Fxcel cable 10 - 16 mm²
- KSX through connectors for Excel and Fxcel cable 10 - 16 mm²
- C sleeves
- AlCu terminals
- Al terminals
-
Un-insulated terminals
- Ring terminal 0.25 - 6 mm²
- Fork terminals 0.25 - 10 mm²
- Pin terminals 0.25 - 6 mm²
- Jointing sleeves 0.75 - 10 mm²
- Receptacles rolled type 0.5 - 6 mm²
- Receptacles with locking lip rolled type 0.5 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles 90° rolled type 0.5 - 1.5 mm²
- Receptacle angled rolled type 0.5 - 1 mm²
- Tab 0.5 - 2.5 mm²
- Tab with locking lip 0.5 - 6 mm²
- Bullet and Socket 0.2 - 1.5 mm²
- Tab connectors
- Tab connector 45°
- Tab connector 90°
- Tab connector 2 x 45°
- Connector block for receptacles 1.5 - 6 mm²
- Connector block for bullets and sockets 0.2 - 1.5 mm²
- Connector block for receptacles - 400V/18A
- Tabs 1, 2 and 3 male
- Insulation boots
- Tabs for soldering
-
Pre-insulated terminals
- Ring terminals 0.1 - 6 mm²
- Fork terminals 0.1 - 6 mm²
- Flanged fork terminals 0.5 - 2.5 mm²
- Hook terminals 0.5 - 2.5 mm²
- Pin terminals 0.1 - 6 mm²
- Blade terminals 0.25 - 6 mm²
- Through connectors 0.25 - 6 mm²
- Through connectors with heat shrink insulation 0.5 - 6 mm²
- Parallel through connectors 0.5 - 6 mm²
- Receptacles, rolled type 0.1 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles fully insulated rolled type 0.5 - 6 mm²
- Tabs 0.5 - 6 mm²
- End connector sleeves fully insulated 1 - 6 mm²
- Bullet 0.25 - 6 mm²
- End connector sleeves fully insulated 0.25 - 6 mm²
-
End sleeves
- Pre-insulated end terminals 0.14 - 50 mm² ET, standard colour
- Pre-insulated end terminals 0.14 - 50 mm² ETT, alternative colour
- Pre-insulated end terminals 0.14 - 50 mm² ETD, alternative colour
- Uninsulated end terminals 0.25 - 50 mm²
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ET2, standard colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETT2, alternative colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETW2, alternative colour code
- Assortment boxes
- Shearbolt connectors
- Cable joint and terminal
- Overhead line connectors
- Crimping tools
- Cutting and stripping tools
- Deep earthing
- Earth braids
- Cable clamps
-
Cu terminals
- Elpress catalogs
- Service request
- System Elpress
What level of service can we provide for you?
Preventive maintenance agreements ensure the highest level of performance for Elpress tools.
Our certified service providers can maintain, repair, check, calibrate and certify Elpress tools. Following a review of the equipment by the service provider, certificates are issued that verify the performance of the tools.
To ensure that your crimped joints maintain a high and even level of quality, regular checks should be done of the crimping tools. The maintenance process includes a service agreement between Elpress and the customer, where we proactively contact you when tools are due for service. Once repair work is done, the checked/certified tools are returned within two weeks. If at any time problems arise with tool functionality (outside of scheduled maintenance checks), contact us directly at sales@elpress.us to initiate a service ticket.
When products / tools are sent to us for:
- Service
- Repair
- Calibration
- Returns
Go to the page Service Request and fill in the form.
Purchased a new product?
Elpress service partner in USA
Precision Hydraulics
Tel: +1-503-228 7133
Fax: +1-503-228 5764
www.precisionhydraulics.com
alecr@precisionhydraulics.com
Downloadable files
Products
Products no longer available for repair/service in our service department.
