Un-insulated terminals
Elpress uninsulated connections up to 10 mm² consists of through connectors, rings, ferrules, forks and pin terminals made of electrolytic copper.
In addition to these, there are flat plug sleeves and round plug sleeves made of brass that have a good elastic characteristic.
Corrosion protection
All connectors are electrolytically tin-plated for maximum corrosion protection.
Marking
The connectors are marked with logotype, cross-sectional area and possible screw diameter. When an adequate crimping is done with the right tool, Elpress' crimping dies/pliers make an impression on the sleeve so that all connections can be checked afterwards. Except for the hobby tools, there is a built-in locking system that ensures that the entire crimping process is completed - a prerequisite for professional and quality-assured work.
Products
Bullet and Socket 0.2 - 1.5 mm²
- Material: brass/Cu, tin plated Cu/Sn.
- HA=Male contact
- HO=Female contact
Connector block for receptacles 1.5 - 6 mm²
- Used with receptacles and tabs 1.5-6 mm² with locking lip.
- Material nylon transparent.
- Max voltage 250 V.
Connector block for bullets and sockets 0.2 - 1.5 mm²
- Used with sockets and bullets 0.2-1.5 mm².
- Material polyamide transparent.
- Max voltage 250 V.
- Max current 20 A.
- Temperature range -20°C to +105°C.
- Tested against breakthrough for 1 min at 1500 V AC.
Connector block for receptacles - 400V/18A
- Used in combination with flat pin sleeves.
- Material PVC transparent.
- Max voltage 400 V.
- Max current 18 A.
System Elpress
System Elpress symbolises Elpress’ guiding principles of safety and quality. These principles are reflected in our certified solutions, training courses and preventive maintenance in the form of service.
