Products
-
Elpress products
-
Pre-insulated terminals
- Ring terminals 0.1 - 6 mm²
- Fork terminals 0.1 - 6 mm²
- Flanged fork terminals 0.5 - 2.5 mm²
- Hook terminals 0.5 - 2.5 mm²
- Pin terminals 0.1 - 6 mm²
- Blade terminals 0.25 - 6 mm²
- Through connectors 0.25 - 6 mm²
- Through connectors with heat shrink insulation 0.5 - 6 mm²
- Parallel through connectors 0.5 - 6 mm²
- Receptacles, rolled type 0.1 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles fully insulated rolled type 0.5 - 6 mm²
- Tabs 0.5 - 6 mm²
- End connector sleeves fully insulated 1 - 6 mm²
- Bullet 0.25 - 6 mm²
- End connector sleeves fully insulated 0.25 - 6 mm²
-
End sleeves
- Pre-insulated end terminals 0.14 - 50 mm² ET, standard colour
- Pre-insulated end terminals 0.14 - 50 mm² ETT, alternative colour
- Pre-insulated end terminals 0.14 - 50 mm² ETD, alternative colour
- Uninsulated end terminals 0.25 - 50 mm²
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ET2, standard colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETT2, alternative colour code
- Pre-insulated TWIN-end terminals 2 x 0.5 - 2 x 10 mm², ETW2, alternative colour code
-
Un-insulated terminals
- Ring terminal 0.25 - 6 mm²
- Fork terminals 0.25 - 10 mm²
- Pin terminals 0.25 - 6 mm²
- Jointing sleeves 0.75 - 10 mm²
- Receptacles rolled type 0.5 - 6 mm²
- Receptacles with locking lip rolled type 0.5 - 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 - 2.5 mm²
- Receptacles 90° rolled type 0.5 - 1.5 mm²
- Receptacle angled rolled type 0.5 - 1 mm²
- Tab 0.5 - 2.5 mm²
- Tab with locking lip 0.5 - 6 mm²
- Bullet and Socket 0.2 - 1.5 mm²
- Tab connectors
- Tab connector 45°
- Tab connector 90°
- Tab connector 2 x 45°
- Connector block for receptacles 1.5 - 6 mm²
- Connector block for bullets and sockets 0.2 - 1.5 mm²
- Connector block for receptacles - 400V/18A
- Tabs 1, 2 and 3 male
- Insulation boots
- Tabs for soldering
- Assortment boxes
-
Cu terminals
- Tube terminals 0.75 - 10 mm²
- KRF tube terminals 16 - 800 mm²
- KRF tube terminals with two holes, 16 - 400 mm²
- KRFS tube terminals 50 - 400 mm² with narrow palm
- KRFN tube terminals 50 - 240 mm² with narrow palm
- KRF angled terminals 90°, 10 - 185 mm²
- KRD tube terminals 16 - 1000 mm²
- KRT tube terminals 10 - 500 mm²
- DIN 46235 tube terminals 6 - 1000 mm²
- DIN 46234 sheet metal terminals 10 - 185 mm²
- KS/KSF through connectors 0.75 - 800 mm²
- KS/KSF through connectors with partition 10-500 mm²
- KSxP parallel connectors for conductors total 0.5 - 6.75 mm²
- KSxP parallel connectors for conductors total 10 - 630 mm²
- CUT through connectors for single strand conductors 6 - 16 mm²
- KSD through connectors 16 - 1000 mm²
- KST through connectors 10 - 500 mm²
- DIN 46230 pin terminals 10 - 95 mm²
- KRX tube terminals for Excel and Fxcel cable 10 - 16 mm²
- KSX through connectors for Excel and Fxcel cable 10 - 16 mm²
- Al terminals
- AlCu terminals
- C sleeves
- Overhead line connectors
- Shearbolt connectors
- Cable joint and terminal
- Crimping tools
- Cutting and stripping tools
- Deep earthing
- Earth braids
- Cable clamps
-
Pre-insulated terminals
- Service request
- System Elpress
Hydraulic electric tools
The Elpress electrohydraulic tool uses the same die system as the other tools in the 600 and 1300 system. The crimping tool has an ergonomic design that means that the balance is perfect in the user's hand and automatic return of the dies when the crimping is completed. The tools are equipped with high-performance Li-Ion batteries that make the work more efficient through a high battery capacity. All tools are tested and certified to provide a connection in accordance with standards.
Click here for a digital catalogue or to download a PDF-file from the catalogue pages
