An innovative and secure system of copper connectors and tools for crimping of flexible copper power cables rated for a max continuous temperature of 150ºC and covers the area range of 95 – 240mm².
Increased demand for high-temperature solutions globally
The increasing need for more resilient and innovative electrical solutions is growing extremely fast in a world with constantly rising technological needs and demanding climate changes.
Today's electrical market has noticed an increasing need for high-temperature solutions globally. The request is exceptionally high for tomorrow's robust electrical connectors, which need more resilience against thermal stress, especially in locations where the climate is average warmer, and the risk of overheating is common.
Successful test and full approval
This increased need has prompted us to extend the standard approval at 90ºC continuously maximum temperature deriving from the IEC 61238-1 standard to this level (150ºC).
To achieve this and maintain existing good properties regarding resilience against vibration and corrosion in the KRF/KSF type range in combination with the DUAL tool system was chosen for a test setup at 150ºC.
For the assembling and running of the test, the same criteria and demands as for IEC 61238-1 has been used with the only difference being the use of an elevated cycling temperature, 150ºC. The result is a full approval at 150ºC according to IEC 61238-1.
Picture from the test in the Elpress Laboratory.
Outstanding resilience against thermal stress
As seen in the following charts, the connector max temperature was about 10ºC lower than the conductor and with a good and stable resistance factor k, all through the test, indicating outstanding resilience against thermal stress.
Contact us by email or phone for more information about high-temperature solutions and support with your projects.
1 E 22nd street, Suite 200
Lombard, IL 60148
Tel +1-331-814 2910
Fax +1-331-814 2914