Earthing is included as a significant part of most electronic application, both in the electrical grid, and for electronics, train manufacture, transformer manufacture and automotive. Equipotential bonding of various electrically conducting objects for the protection of people and property. For the various purposes and needs, Elpress has adapted earthing systems to offer.
Elpress System Deep Earthing is particular useful for earthing when there is a need for a continuous measurement of earth plate values at the same time that the contact point is driven down into the ground.
Principle
The electrode consists of a copper line that is driven down by a system consisting of 0.8 metre long joinable steel pipes and a hardened steel tip at the front, which paves the way for the earthing wire and driving it into the ground.
The discharge resistance is continuously measured in one end of the line and when a suitable value is reached, the insertion is stopped and the last extension pipe is pulled up. Insertion takes place with the aid of a beater with an adapted hammer neck or a sledge hammer and striking sleeve.
Benefits
• no jointing of earth electrode/earthing wire
• large area range: 16-95 mm²
• can be used for various kinds of wires
• corrosion resistant - very long lifetime
• control over wire and tip not striking rock
• possibility to continuously measure the discharge resistance
• few parts makes the insertion uncomplicated and reliable
• low cost and weight compared with other systems
Read more here about the benefits of Elpress Deep Earthing System.
Elpress System Railbond is intended for connection to rails. The connection provides a secure and reliable link for the contact between a terminal and rail for a signal or earthing connection
The tested programme, with references from several European countries and documented tests according to applicable standards, consists of terminals, crimping tool, driller and deburring tool in addition to Railbond.
Accessories for depth earthing, tip, leading rod, extension rod, withdrawal handle and driving cap.
Accessories for depth earthing, tip, leading rod andextension rod. For hard and stony soils.
Driving studs for Elpress deep earthing system, specially designed for use with the FS21 and FS31 rod.
System Elpress symbolises Elpress’ guiding principles of safety and quality. These principles are reflected in our certified solutions, training courses and preventive maintenance in the form of service.
No ads consent given, to see video, enable ads consent