Elpress Electrical Machines EN by Elpress

Electrical Machines

ELPRESS KEY INDUSTRIES PRODUCTCATALOGUE

World Leading Supplier of System Solutions.

Electrical Machines is one of Elpress’ key segments where we provide secure and sustainable solutions for tomorrow’s electrified society. We are a world leading supplier of system solutions for crimping Winding Conductors and CTC’s in combination with round cable types.

Our unique crimping system makes us stand out from the rest where the majority of the leading manufactures of Power Transformers across the world are using System Elpress for their crimping requirements.

What we offer.

Together with a high level of service and product knowledge we make sure that you get a safe and secure electrical connection. When crimping in advanced applications, such as transformer connections, it is necessary that the crimping system has a high level of performance and is reliable. With our extensive knowledge and long experience in the industry, we have developed a complete crimping system where we offer training of operators, certifications and special products.

Elpress’ crimping system for Transformer connectors contains:

• Joints, such as terminals and through connectors adapted to transformer conductors

• Electrically powered, hydraulic pumps with ergonomic crimping tools, rounding and crimping dies

• Tested according to international standards

• Qualification of production methods

• Training and certification of operators

Advanced crimping makes reliability, high performance and documentation essential

Crimping system

When crimping in advanced applications as transformers it is essential that the crimping system is a high performance and reliable system. Elpress has developed a wide range of products specialized for these applications. Together with training of operators, certifications and the products this is a complete system concept. Elpress Crimp System for Transformer connections is:

• Terminals and connectors adapted to transformer use

• Electrically powered crimp tools with ergonomic crimp heads, rounding and crimp dies

• Test certification to international standards

• Production quality procedures

Tools

With the 13, 25 and 35 tons crimp heads Elpress ensures easy operation both when rounding of winding bundles and when crimping. Elpress offers a mains and/or battery operated hydraulic pump that is controlled from the crimping head handle and powers the crimping head. Rounding and crimping dies are polished for minimising the risk of sharp edges. Winding connections are crimped within the following acceptance range for each connection.

Nominal connector area mm², winding conductor mm²

Product quality assurance

It is essential to have simple means of identifying correct crimp procedures and results while working. With the Elpress System the dies leave an imprint on the crimped barrel surface showing the die identification. This enables a direct and easy inspection that proper tools have been used. For all crimps a crimp height limit is given to make an easy check of proper tool function by means of a vernier caliper or a gauge.

Operator training

To ensure that operators have the detailed knowledge that is the base for long term quality, Elpress runs theoretical and practical training sessions at each production site resulting in certification of the individual operators. These trained operators will have a qualified level in regard to practical work procedures as well as the precautions that ensure proper results. Please contact Elpress for more information.

Terminals and connectors

Elpress complete system consists of terminals and connectors from 25 to 630 mm². They have the suffix L which is the customers’ guarantee that the connectors are a part of the quality assured system. Special items have been developed, like the straight and angled T-connectors. Markings on the terminals and connectors show tool identification, size, stud hole and manufacturers emblem. The markings are made for easier and correct use.

Tests

Elpress has tested the use of terminals and connectors within the specified cross section area ranges in accordance with IEC 61238-1. This is the most widely accepted test standard with a qualified evaluation of performance stability. Inspection certificates are available from Elpress and can be requested if needed.

Assured results

When you work with the Elpress Crimp System for Transformer Conductor Connections, and follow the instructions for this system, you get results which have been tested to well established standards and requirements. This is your way of getting assured results in production work.

Nom. connector area Tot. initial real winding conductor cross section Tot. initial real winding conductor cross section mm² min mm² max mm² 25 30 47 35 45 70 50 69 103 70 100 120 95 113 161 120 145 185 150 180 220 185 220 265 240 302 343 300 340 400 400 412 500 500 500 580 630 800 630 720 730 960

KRF95-8

Marking of tube terminals (L)

20 (on the terminal neck) ID-no. for the hexagonal die

(Elpress logo) 95-8F (on the palm)

95 = Cu-conductor area, mm²

8 = hole for screw M18

shows logotype, conductor area and ID-number for crimp die to be used. This system enables final inspection of proper die use as the die number is automatically imprinted by the die on the crimped barrel, see picture above.

Checking measures KRF/KSF, L dies (N-measure)

Type KRF/KSF with B (L) dies

Marking of connectors

(Elpress logo) 25 ID-no. for hexagonal die

150 F 150 = Cu-conductor area, mm² F = KSF

IEC classes

Definitions for cable classes:

• Solid = IEC 60228 Class 1

• Stranded = IEC 60228 Class 2

• Flexible = IEC 60228 Class 5

• Very flexible = IEC 60228 Class 6

Electrical Machines cross reference table for

and AWG for mm²

Stud holes in terminal palms

Screw dimension Hole diameter tolerance H13 (Ø mm)

1. The information in this table is derived from catalogues distributed by cable suppliers and does not relate to official standards.

2. The cross sections that relate to AWG vary depending on different design of the conductors, ie numbers of strands. The exact cross sections for specific numbers of strands can be found in cable-supplier catalogues.

Quality assured systems

We also offer special developed purpose-built products, such as for instance reducer straight and angled T connectors, to ensure that you have the right crimping solution for your specific application. Our complete system includes connectors from 10 to 800 mm2. They have the suffix L, which is the user’s guarantee that the component is a part of the quality assured system. The marking on the connector shows ID number for crimping tools, metric size, bolt size (for terminals) and make in the form of the logotype. The marking ensures easy and correct use.

KRF/KSF (L) mm² Die no. max N mm 25 13B11L 8.8 35 13B13L 10.3 50 13B14,5L/13CB14,5L 10.9 70 13B17L/13CB17L 13.5 95 13B20L/13CB20L 16.4 120 13B22L/13CB22L 16.5 150 13B25L/13CB25L/B2525L 20.3 185 13B27L/13CB27L/B2527L 20.6 240 13B30L/13CB30L/B2530L 23.4 300 B2532L 24.6 400 B2538L 30.5 500 B2542L 30.7 630 800 B2550L B3553L 38.5 38,5

M3 3.2 M4 4.3 M5 5.3 M6 6.4 M8 8.4 M10 10.5 M12 13 M16 17 M20 21 M24 25

KRF

MCM Area mm² AWG Area mm² 250 127 36 0.013 300 152 34 0.020 350 177 32 0.032 400 203 30 0.051 450 228 28 0.080 500 253 26 0.13 550 279 24 0.20 600 304 22 0.33 650 329 20 0.56 700 355 19 0.65 750 380 18 0.82 800 405 17 1.04 850 431 16 1.31 900 456 15 1.65 1000 507 14 2.08 1100 557 13 2.62 1200 608 12 3.31 1300 659 11 4.17 1400 709 10 5.26 1500 760 9 6.63 1600 811 8 8.37 1700 861 7 10.6 1800 912 6 13.3 1900 963 5 16.8 2000 1013 4 21.2 3 26.4 2 33.6 1 42.4 1/0 53.5 2/0 67.4 3/0 85.5 4/0 107 Notes:

MCM

Tube terminals 16 - 630 mm²

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole. For winding, flexible and stranded Cu-conductors.

Marking example KRF: 95 12F, (Elpress logotype included) 20

95 = mm² 12 = palm hole for M12 F = type KRF, 20 = Die No.

Contact Elpress for more information

t = palm thickness, s = strip length

Conductor Cu mm² Winding mm² Name Screw W mm d t N N1 P L s Tool Die Pcs/ pack Note 16 KRF16-6L 6 13 6 2,9 8 9 17 34 11 V1300 9L 100 Round conductors only 16 KRF16-8L 8 13 6 2,9 8 9 17 34 11 V1300 9L 100 Round conductors only 16 KRF16-10L 10 16 6 2,2 10 11 21 38 11 V1300 9L 100 Round conductors only 16 KRF16-12L 12 22 6 1,6 12 23 25 47 11 V1300 9L 100 Round conductors only 25 30-47 KRF25-6L 6 16 8 2,9 8 10 18 39 13 V1300 11L 100 25 30-47 KRF25-8L 8 16 8 2,9 8 10 18 39 13 V1300 11L 100 25 30-47 KRF25-10L 10 17 8 2,9 10 11 21 42 13 V1300 11L 100 25 30-47 KRF25-12L 12 22 8 2,1 12 13 25 47 13 V1300 11L 100 35 45-70 KRF35-6L 6 18 9 3,9 10 11 21 47 16 V1300 13L 100 35 45-70 KRF35-8L 8 18 9 3,9 10 11 21 47 16 V1300 13L 100 35 45-70 KRF35-10L 10 18 9 3,9 10 11 21 47 16 V1300 13L 100 35 45-70 KRF35-12L 12 22 9 3,2 12 14 26 52 16 V1300 13L 100 50 69-103 KRF50-8L 8 21 11 3,4 11 11 22 50 19 V1300 14,5L 100 50 69-103 KRF50-10L 10 21 11 3,4 11 11 22 50 19 V1300 14,5L 100 50 69-103 KRF50-12L 12 21 11 3,4 12 13 25 53 19 V1300 14,5L 100 50 69-103 KRF50-16L 16 27 11 2,7 15 16 31 59 19 V1300 14,5L 100 70 100-120 KRF70-8L 8 25 13 3,9 11 11 22 55 22 V1300 17L 50 70 100-120 KRF70-10L 10 25 13 3,9 11 11 22 55 22 V1300 17L 50 70 100-120 KRF70-12L 12 25 13 3,9 12 13 25 58 22 V1300 17L 50 70 100-120 KRF70-16L 16 28 13 3,5 15 16 31 64 22 V1300 17L 50 95 113-161 KRF95-8L 8 29 15 4,9 15 16 31 69 25 V1300 20L 50 95 113-161 KRF95-10L 10 29 15 4,9 15 16 31 69 25 V1300 20L 50 95 113-161 KRF95-12L 12 29 15 4,9 15 16 31 69 25 V1300 20L 50 95 113-161 KRF95-16L 16 29 15 4,9 15 16 31 69 25 V1300 20L 50 120 145-185 KRF120-8L 8 32 17 4,9 15 16 31 73 27 V1300 22L 25 120 145-185 KRF120-10L 10 32 17 4,9 15 16 31 73 27 V1300 22L 25 120 145-185 KRF120-12L 12 32 17 4,9 15 16 31 73 27 V1300 22L 25 120 145-185 KRF120-16L 16 32 17 4,9 15 16 31 73 27 V1300 22L 25 150 180-220 KRF150-00L 36 19 5,8 31 80 32 V1300, V250 25L 25 Unholed palm 150 180-220 KRF150-8L 8 36 19 5,8 15 16 31 80 32 V1300, V250 25L 25 150 180-220 KRF150-10L 10 36 19 5,9 15 16 31 80 32 V1300, V250 25L 25 150 180-220 KRF150-12L 12 36 19 5,9 15 16 31 80 32 V1300, V250 25L 25 150 180-220 KRF150-16L 16 36 19 5,9 15 16 31 80 32 V1300, V250 25L 25 185 220-265 KRF185-00L 39 21 5,9 38 93 37 V1300, V250 27L 20 Unholed palm 185 220-265 KRF185-10L 10 39 21 5,9 15 16 31 86 37 V1300, V250 27L 20 185 220-265 KRF185-12L 12 39 21 5,9 15 16 31 86 37 V1300, V250 27L 20 185 220-265 KRF185-16L 16 39 21 5,9 15 16 31 86 37 V1300, V250 27L 20 185 220-265 KRF185-20L 20 39 21 5,9 19 19 38 93 37 V1300, V250 27L 20 240 302-343 KRF240-00L 44 24 5,8 38 95 37 V1300, V250 30L 10 Unholed palm 240 302-343 KRF240-8L 8 44 24 5,9 19 19 38 95 37 V1300, V250 30L 10 240 302-343 KRF240-10L 10 44 24 5,9 19 19 38 95 37 V1300, V250 30L 10 240 302-343 KRF240-12L 12 44 24 5,9 19 19 38 95 37 V1300, V250 30L 10 240 302-343 KRF240-16L 16 44 24 5,9 19 19 38 95 37 V1300, V250 30L 10 300 340-400 KRF300-00L 46 24,5 6,8 54 116 44 V250 32L 10 Unholed palm 300 340-400 KRF300-10L 10 46 24,5 6,8 22 32 54 116 44 V250 32L 10 300 340-400 KRF300-12L 12 46 24,5 6,8 22 32 54 116 44 V250 32L 10 300 340-400 KRF300-16L 16 46 24,5 6,8 22 32 54 116 44 V250 32L 10 300 340-400 KRF300-20L 20 46 24,5 6,8 22 32 54 116 44 V250 32L 10 400 412-500 KRF400-00L 56 30 7,8 55 125 52 V250 38L 10 Unholed palm 400 412-500 KRF400-10L 10 56 30 7,8 22 33 55 125 52 V250 38L 10 400 412-500 KRF400-12L 12 56 30 7,8 22 33 55 125 52 V250 38L 10 400 412-500 KRF400-16L 16 56 30 7,8 22 33 55 125 52 V250 38L 10 400 412-500 KRF400-20L 20 56 30 7,8 23 25 48 119 52 V250 38L 10 500 500-580 KRF500-00L 61 33 8,8 70 160 70 V250 42L 5 Unholed palm 500 500-580 KRF500-12L 12 61 33 8,8 25 35 60 150 49 V250 42L 5 500 500-580 KRF500-16L 16 61 33 8,8 25 35 60 150 68 V250 42L 5 500 500-580 KRF500-20L 20 61 33 8,8 25 35 60 150 68 V250 42L 5 630 630-730 KRF630-20L 20 73 39 10,8 25 35 60 175 80 V250 50L 5 800

Tube terminals 90°, 25 - 400 mm²

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole. For winding, flexible and stranded Cu-conductors.

Marking example KRF: 95 12F (Elpress logotype included) 20 95 = mm², 12 = palm hole for M12, F = type KRF, 20 = Die No.

Conductor Cu mm² Winding mm² Name Screw W mm d N N1 P A t s Tool Die Pcs/ pack 25 30-47 KRF25-8L-90GR 8 16 8 8,5 12 20,5 18,5 2,9 13 V1300 11L 50 25 30-47 KRF25-10L-90GR 10 17 8 11,5 13,5 25 18,5 2,9 13 V1300 11L 100 35 45-70 KRF35-8L-90GR 8 18 9 8,5 12 20,5 22,5 3,9 16 V1300 13L 100 35 45-70 KRF35-10L-90GR 10 18 9 11,5 13,5 25 22,5 3,9 16 V1300 13L 100 35 45-70 KRF35-12L-90GR 12 19 9 12,5 17,5 30 22,5 3,7 16 V1300 13L 100 50 69-103 KRF50-8L-90GR 8 21 11 8,5 17,5 28 30,5 3,4 19 V1300 14,5L 100 50 69-103 KRF50-10L-90GR 10 21 11 11,5 18,5 30 30,5 3,4 19 V1300 14,5L 100 50 69-103 KRF50-12L-90GR 12 21 11 12,5 19,5 32 30,5 3,4 19 V1300 14,5L 100 70 100-120 KRF70-8L-90GR 8 24 13 8,5 17,5 26 31,5 3,9 22 V1300 17L 50 70 100-120 KRF70-12L-90GR 12 24 13 12,5 19,5 32 31,5 3,9 22 V1300 17L 50 70 100-120 KRF70-10L-90GR 10 24 13 11,5 18,5 30 31,5 3,9 22 V1300 17L 50 95 113-161 KRF95-8L-90GR 8 28 15 8,5 17,5 26 32,5 4,9 25 V1300 20L 50 95 113-161 KRF95-10L-90GR 10 28 15 11,5 18,5 30 32,5 4,9 25 V1300 20L 50 95 113-161 KRF95-12L-90GR 12 28 15 12,5 19,5 32 32,5 4,9 25 V1300 20L 50 95 113-161 KRF95-16L-90GR 16 29 15 15,5 20,5 36 32,5 4,9 25 V1300 20L 50 120 145-185 KRF120-10L-90GR 10 32 17 11,5 18,5 30 42 4,9 27 V1300 22L 25 120 145-185 KRF120-12L-90GR 12 32 17 12,5 19,5 32 42 4,9 27 V1300 22L 25 120 145-185 KRF120-16L-90GR 16 32 17 15,5 20,5 36 42 4,9 27 V1300 22L 25 150 180-220 KRF150-10L-90GR 10 36 19 11,5 18,5 30 47 5,9 27 V1300, V250 25L 25 150 180-220 KRF150-12L-90GR 12 36 19 12,5 19,5 32 47 5,9 27 V1300, V250 25L 25 150 180-220 KRF150-16L-90GR 16 36 19 15,5 20,5 36 47 5,9 32 V1300, V250 25L 25 185 220-265 KRF185-10L-90GR 10 39 21 11,5 18,5 30 42,5 5,8 37 V1300, V250 27L 25 185 220-265 KRF185-12L-90GR 12 39 21 12,5 19,5 32 42,5 5,8 37 V1300, V250 27L 20 240 302-343 KRF240-10L-90GR 10 44 24 11,5 18,5 30 47 5,9 37 V1300, V250 30L 15 240 302-343 KRF240-12L-90GR 12 44 24 12,5 19,5 32 47 5,9 37 V1300, V250 30L 15 300 340-400 KRF300-12L-90GR 12 46 24,5 15 25 40 57 6,9 44 V250 32L 10 300 340-400 KRF300-16L-90GR 16 46 24,5 20 25 45 57 6,9 44 V250 32L 10 400 412-500 KRF400-12L-90GR 12 56 30 22 33 55 64,2 7,8 52 V250 38L 5 400 412-500 KRF400-16L-90GR 16 56 30 22 33 55 64,2 7,8 52 V250 38L 5 t = palm thickness, s = strip length

Tube terminals 45°, 25 - 400 mm²

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole. For winding, flexible and stranded Cu-conductors.

Marking example KRF: 95 12F (Elpress logotype included) 20

95 = mm² 12 = palm hole for M12 F = type KRF, 20 = Die No.

Conductor Cu mm² Winding mm² Name Screw W mm d N N1 P A t s Tool Die Pcs/ pack 25 30-47 KRF25-8L-45GR 8 16 8 8,5 12,2 20,7 23 2,9 13 V1300 11L 50 25 30-47 KRF25-10L-45GR 10 17 8 11,5 13,7 25,2 23 2,9 13 V1300 11L 100 35 45-70 KRF35-8L-45GR 8 18 9 8,5 12 20,5 30 3,9 16 V1300 13L 100 35 45-70 KRF35-10L-45GR 10 18 9 11,5 13,5 25 30 3,9 16 V1300 13L 100 35 45-70 KRF35-12L-45GR 12 19 9 12,5 17,5 30 30 3,7 16 V1300 13L 100 50 69-103 KRF50-8L-45GR 8 21 11 8,5 17,5 26 31 3,4 19 V1300 14,5L 100 50 69-103 KRF50-10L-45GR 10 21 11 11,5 18,5 30 31 3,4 19 V1300 14,5L 100 50 69-103 KRF50-12L-45GR 12 21 11 12,5 19,5 32 31 3,4 19 V1300 14,5L 100 70 100-120 KRF70-10L-45GR 10 25 13 11,5 18,5 30 35 3,9 22 V1300 17L 50 70 100-120 KRF70-12L-45GR 12 24 13 12,5 19,5 32 35 3,9 22 V1300 17L 50 95 113-161 KRF95-10L-45GR 10 28 15 11,5 18,5 30 40 4,9 25 V1300 20L 50 95 113-161 KRF95-12L-45GR 12 29 15 12,5 19,5 32 40 4,9 25 V1300 20L 50 120 145-185 KRF120-10L-45GR 10 32 17 11,5 18,5 30 43 4,9 27 V1300 22L 25 120 145-185 KRF120-12L-45GR 12 32 17 12,5 19,5 32 43 4,9 27 V1300 22L 25 150 180-220 KRF150-10L-45GR 10 36 19 11,5 18,5 30 49 5,9 32 V1300, V250 25L 25 150 180-220 KRF150-12L-45GR 12 36 19 12,5 19,5 32 49 5,9 32 V1300, V250 25L 25 185 220-265 KRF185-10L-45GR 10 39 21 11,5 18,5 30 55 5,8 37 V1300, V250 27L 20 185 220-265 KRF185-12L-45GR 12 39 21 12,5 19,5 32 55 5,8 37 V1300, V250 27L 20 240 302-343 KRF240-10L-45GR 10 44 24 11,5 18,5 30 57 5,8 37 V1300, V250 30L 10 240 302-343 KRF240-12L-45GR 12 44 24 12,5 19,5 32 57 5,8 37 V1300, V250 30L 10 300 340-400 KRF300-12L-45GR 12 46 24,5 22 18 40 61 6,8 44 V250 32L 10 300 340-400 KRF300-16L-45GR 16 46 24,5 22 18 40 61 6,8 44 V250 32L 10 400 412-500 KRF400-12L-45GR 12 56 30 22 18 40 75 7,8 52 V250 38L 8 t = palm thickness, s = strip length

Tube terminals with two stud holes 50 - 630 mm²

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole. For winding, flexible and stranded Cu-conductors.

Marking example KRF: 95 12F (Elpress logotype included) 20

95 = mm² 12 = palm hole for M12 F = type KRF, 20 = Die No.

t = palm thickness, s = strip length

Tube terminals with two stud holes (one oval) 50 - 240 mm²

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole. For winding, flexible and stranded Cu-conductors.

• With an oval hole nearest the tube.

Marking example KRF: 95 12F (Elpress logotype included) 20 95 = mm² 12 = palm hole for M12 F = type KRF, 20 = Die No.

mm² Winding mm² Name Screw W mm d N N1 P cc L t s Tool Die Pcs/ pack 50 69-103 KRF50-12X2-44,5L 12x2 21 11 12 18,5 75 44,5 105 3,4 19 V1300 14,5L 50 70 100-120 KRF70-12X2-44,5L 12x2 25 13 12 17,5 74 44,5 107 3,9 22 V1300 17L 25 95 113-161 KRF95-12X2-40L 12x2 29 15 12 18 70 40 109 4,9 25 V1300 20L 25 95 113-161 KRF95-12X2-44,5L 12x2 29 15 12 18,5 75 44,5 113 4,9 25 V1300 20L 25 120 145-185 KRF120-12X2-40L 12x2 32 17 12 19 71 40 113 4,9 27 V1300 22L 25 120 145-185 KRF120-12X2-44,5L 12x2 32 17 12 17,5 74 44,5 116 4,9 27 V1300 22L 25 150 180-220 KRF150-12X2-40L 12x2 36 19 12 19 71 40 120 5,9 32 V1300, V250 25L 20 150 180-220 KRF150-12X2-44,5L 12x2 36 19 12 18,5 75 44,5 123 5,9 32 V1300, V250 25L 20 185 220-265 KRF185-12X2-40L 12x2 39 21 12 20 72 40 126 5,9 37 V1300, V250 27L 20 296 220-265 KRF185-12X2-44,5L 12x2 39 21 12 19,5 76 44,5 130 5,9 37 V1300, V250 27L 10 240 302-343 KRF240-12X2-40L 12x2 44 24 12 21 73 40 129 5,9 37 V1300, V250 30L 10 240 302-343 KRF240-12X2-44,5L 12x2 44 24 12 19,5 76 44,5 132 5,9 37 V1300, V250 30L 10 300 340-400 KRF300-12X2-40L 12x2 45 24,5 12 22 74 40 136 6,8 44 V250 32L 10 300 340-400 KRF300-12X2-44,5L 12x2 46 24,5 12 20,5 77 44,5 139 6,8 44 V250 32L 10 400 412-500 KRF400-12X2-40L 12x2 56 30 12 23 75 40 145 7,8 52 V250 38L 5 400 412-500 KRF400-12X2-44,5L 12x2 56 30 12 20,5 77 44,5 147 7,8 52 V250 38L 5 500 500-580 KRF500-12X2-40L 12x2 61 33 15 15 70 40 160 8,8 70 V250 42L 5 500 500-580 KRF500-12X2-44,5L 12x2 61 33 12 18,5 75 44,5 165 8,8 70 V250 42L 5 630 800 630-730 KRF630-12X2-44,5L 12x2 73 39 15 20,5 80 44,5 195 10,8 80 V250 50L

Conductor Cu mm² Winding mm² Name Screw W mm d N N1 P cc L t s Tool Die Pcs/ pack 50 69-103 KRF50-10X2-24-26L 10x2 21 11 11 22 58 25 87 3,4 19 V1300 14,5L 50 70 100-120 KRF70-10X2-24-26L 10x2 25 13 11 17 53 25 86 3,9 22 V1300 17L 50 95 113-161 KRF95-10X2-24-26L 10x2 29 15 11 19 55 25 93 4,9 25 V1300 20L 25 120 145-185 KRF120-10X2-24-26L 10x2 32 17 11 19 55 25 97 4,9 27 V1300 22L 25 150 180-220 KRF150-10X2-24-26L 10x2 36 19 11 19 55 25 104 5,9 32 V1300, V250 25L 25 185 220-265 KRF185-10X2-24-26L 10x2 39 21 11 21 57 25 111 5,9 37 V1300, V250 27L 20 240 302-343 KRF240-10X2-24-26L 10x2 44 24 11 22 58 25 114 5,9 37 V1300, V250 30L 10 t = palm thickness, s = strip length Contact Elpress for more information

Tube terminals 90° with two stud holes 150 - 630 mm²

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole.

• For winding, flexible and stranded Cu-conductors.

Marking example KRF: 150 12F (Elpress logotype included) 25

150 = mm² 12 = palm hole for M12 F = type KRF 25 = Die No.

Tube terminals 90° with two stud holes (one oval) 70 - 240 mm²

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole.

• For winding, flexible and stranded Cu-conductors.

• With an oval hole nearest the tube.

Marking example KRF: 150 12F (Elpress logotype included) 25 150 = mm² 12 = palm hole for M12 F = type KRF 25 = Die No.

Conductor Cu mm² Winding mm² Name Screw W mm d N N1 P cc A t s Tool Die Pcs/ pack 150 180-220 KRF150-12X2-40L-90GR 12x2 36 19 12 15 67 40 46,1 5,9 32 V1300, V250 25L 20 150 180-220 KRF150-12X2-44,5L-90GR 12x2 36 19 12 16,5 73 44,5 50 5,9 32 V1300, V250 25L 25 240 302-343 KRF240-12X2-40L-90GR 12x2 44 24 12 22 74 40 57,1 5,9 37 V1300, V250 30L 10 240 302-343 KRF240-12X2-44,5L-90GR 12x2 44 24 12 15,5 72 44,5 57,1 5,8 37 V1300, V250 30L 15 300 340-400 KRF300-12X2-40L-90GR 12x2 46 24,5 12 22 74 40 70 6,8 44 V250 32L 10 400 412-500 KRF400-12X2-44,5L-90GR 12x2 56 30 12 23,5 80 44,5 70 7,8 52 V250 38L 5 500 500-580 KRF500-12X2-44,5L-90GR 12X2 61 33 15 20,5 80 44,5 86 8,8 70 V250 42L 4 630 630-730 KRF630-12X2-44,5L-90GR 12x2 73 39 15 17,5 80 44,5 112 10,8 80 V250 50L 1 t = palm thickness,

s = strip length

Conductor Cu mm² Winding mm² Name Screw W mm d N N1 P cc A t s Tool Die Pcs/ pack 70 100-120 KRF70-10X2-24-26L-90GR 10X2 25 13 11 16 51 24 30,1 3,9 22 V1300 17L 50 150 180-220 KRF150-10X2-24-26L-90GR 10x2 36 19 11 18 53 24 48,1 5,9 32 V1300, V250 25L 20 240 302-343 KRF240-10X2-24-26L-90GR 10x2 44 24 11 19 56 24 57,1 5,9 37 V1300, V250 30L 10 t

thickness, s

= palm

= strip length

Through connectors 16 - 630 mm²

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole and cable stop.

• For winding, flexible and stranded Cu-conductors.

Marking example: 20 95F (earth-sign) Elpress logotype included 20 = die no. 95 = mm² F = type KSF

Conductor Cu mm² Winding mm² Name d mm D L s Tool Die Pcs/ pack Note 16 - KSF16L 6 9 35 11 V1300 9L 100 For use with round conductors only 25 30-47 KSF25L 8 11 35 13 V1300 11L 100 35 45-70 KSF35L 9 13 35 17 V1300 13L 100 50 69-103 KSF50L 11 14,5 45 22 V1300 14,5L 50 70 100-120 KSF70L 13 17 45 22 V1300 17L 50 95 113-161 KSF95L 15 20 45 25 V1300 20L 50 120 145-185 KSF120L 17 22 55 27 V1300 22L 50 150 180-220 KSF150L 19 25 65 32 V1300, V250 25L 25 185 220-265 KSF185L 21 27 70 35 V1300, V250 27L 25 240 302-343 KSF240L 24 30 70 35 V1300, V250 30L 25 300 340-400 KSF300L 24,5 31,5 75 37 V250 32L 10 400 412-500 KSF400L 30 38 100 50 V250 38L 10 500 500-580 KSF500L 33 42 135 68 V250 42L 5 630 800 630-730 KSF630L 39 50 170 80 V250 50L 2 s = strip length Contact Elpress for more information

Reducer through connectors 35 - 630 mm²

• Material: Cu 99.95%, tin plated Cu/Sn. For winding, flexible and stranded Cu-conductors.

Marking example: 25-150F 20-95F Elpress logotype included 25 / 20 = Die No. 150, 95 = mm² F = type KSF

Conductor Cu mm² Winding mm² Name d mm d1 D D1 L L1 L2 s s1 Tool Die Die (Smaller area) Pcs/ pack 35-16 45-70/- KSF35-16L 9 6 13 9 32 16,8 13 18 V1300 13L 9L 1 35-25 45-70/30-47 KSF35-25L 9 8 13 11 33 16 14 18 16 V600, V1300 13L 11L 100 50-25 69-103/30-47 KSF50-25L 11 8 14,5 11 40 20,4 16 22 18 V600, V1300 14,5L 11L 50 50-35 69-103/45-70 KSF50-35L 11 9 14,5 13 55 24,1 25 26 27 V600, V1300 14,5L 13L 50 70-25 100-120/30-47 KSF70-25L 13 8 17 11 46 24,5 16 26 V600, V1300 17L 11L 1 70-35 100-120/45-70 KSF70-35L 12,9 9 17 13 60 24,2 25 26 27 V600, V1300 17L 13L 50 70-50 100-120/69-103 KSF70-50L 13 11 17 14,5 50 24,2 20 26 22 V600, V1300 17L 14,5L 50 95-25 113-161/30-47 KSF95-25L 15 8 20 11 52 26,1 18 27 16 V600, V1300 20L 11L 25 95-35 113-161/45-70 KSF95-35L 15 9 20 13 60 25,4 25 27 27 V600, V1300 20L 13L 25 95-50 113-161/69-103 KSF95-50L 15 11 20 14,5 55 25,3 20 27 22 V600, V1300 20L 14,5L 25 95-70 113-161/100-120 KSF95-70L 15 13 20 17 60 25,2 25 27 27 V600, V1300 20L 17L 25 120-35 145-185/45-70 KSF120-35L 17 9 22 13 65 31,6 25 33 27 V600, V1300 22L 13L 25 120-50 145-185/69-103 KSF120-50L 17 11 22 14,5 60 31,5 20 33 22 V600, V1300 22L 14,5L 50 120-70 145-185/100-120 KSF120-70L 17 13 22 17 65 31,3 25 33 27 V600, V1300 22L 17L 25 120-95 145-185/113-161 KSF120-95L 17 15 22 20 70 31,2 31 33 33 V600, V1300 22L 20L 25 150-35 180-220/45-70 KSF150-35L 19 9 25 13 65 32 25 33 27 V1300 25L 13L 25 150-50 180-220/69-103 KSF150-50L 19 11 25 14,5 60 31,9 20 33 22 V1300 25L 14,5L 25 150-70 180-220/100-120 KSF150-70L 19 13 25 17 65 31,7 25 33 27 V1300 25L 17L 25 150-95 180-220/113-161 KSF150-95L 19 15 25 20 70 31,5 31 33 33 V1300 25L 20L 25 150-120 180-220/145-185 KSF150-120L 19 17 25 22 70 31,3 31 33 33 V1300 25L 22L 25 185-35 220-265/45-70 KSF185-35L 21 9 27 13 65 32,2 25 33 27 V1300 27L 13L 25 185-50 220-265/69-103 KSF185-50L 21 11 27 14,5 65 32,1 25 33 27 V1300 27L 14,5L 25 185-70 220-265/100-120 KSF185-70L 21 13 27 17 65 31,8 25 33 27 V1300 27L 17L 25 185-95 220-265/113-161 KSF185-95L 21 15 27 20 71 31,6 31 33 33 V1300 27L 20L 25 185-120 220-265/145-185 KSF185-120L 21 17 27 22 70 31,5 31 33 33 V1300 27L 22L 25 185-150 220-265/180-220 KSF185-150L 21 19 27 25 71 31,1 31 33 33 V1300, V250 27L 25L 25 240-35 302-343/45-70 KSF240-35L 24 9 30 13 65 32,3 25 33 27 V1300 30L 13L 25 240-50 302-343/69-103 KSF240-50L 24 11 30 14,5 70 32,2 30 33 32 V1300 30L 14,5L 25 240-70 302-343/100-120 KSF240-70L 24 13 30 17 65 33,5 25 33 27 V1300 30L 17L 25 240-95 302-343/113-161 KSF240-95L 24 15 30 20 71 31,8 31 33 33 V1300 30L 20L 25 240-120 302-343/145-185 KSF240-120L 24 17 30 22 70 31,8 31 33 33 V1300 30L 22L 25 240-150 302-343/180-220 KSF240-150L 24 19 30 25 70 31 31 33 33 V1300, V250 30L 25L 25 240-185 302-343/220-265 KSF240-185L 24 21 30 27 70 31,3 31 33 33 V1300, V250 30L 27L 25 300-70 340-400/100-120 KSF300-70L 24,5 13 31,5 17 70 36,1 24 37 26 V250, V1300 32L 17L 25 300-95 340-400/113-161 KSF300-95L 24,5 15 31,5 20 77 35,9 31 37 33 V250, V1300 32L 20L 25 300-120 340-400/145-185 KSF300-120L 24,5 17 31,5 22 76 35,9 31 37 33 V1300, V250 32L 22L 25 300-150 340-400/180-220 KSF300-150L 24,5 19 31,5 25 76 35,6 31 37 33 V250 32L 25L 10 300-185 340-400/220-265 KSF300-185L 24,5 21 31,5 27 76 35,4 31 37 33 V250 32L 27L 20 300-240 340-400/302-343 KSF300-240L 24,5 24 31,5 30 76 35,1 31 37 33 V250 32L 30L 20 400-35 412-500/45-70 KSF400-35L 30 9 38 13 82 47 25 47 27 V250, V1300 38L 13L 1 400-95 412-500/113-161 KSF400-95L 30 15 38 20 90 45 31 47 33 V1300, V250 38L 20L 10 400-120 412-500/145-185 KSF400-120L 30 17 38 22 90 45 31 47 33 V250, V1300 38L 22L 5 400-150 412-500/180-220 KSF400-150L 30 19 38 25 90 45 31 47 33 V250 38L 25L 10 400-185 412-500/220-265 KSF400-185L 30 21 38 27 90 45 31 47 33 V250 38L 27L 5 400-240 412-500/302-343 KSF400-240L 30 24 38 30 90 45 31 47 33 V1300, V250 38L 30L 10 300-400 412-500/340-400 KSF400-300L 30 24,5 38 31,5 90 45 35 47 37 V250 38L 32L 10 500-95 500-580/113-161 KSF500-95L 33 15 42 20 101 47 31 49 27 V250, V1300 42L 20L 10 500-120 500-580/145-185 KSF500-120L 33 17 42 22 101 47 31 49 33 V250, V1300 42L 22L 1 500-150 500-580/180-220 KSF500-150L 33 19 42 25 101 47 31 49 33 V250 42L 25L 10 185-500 500-580/220-265 KSF500-185L 33 21 42 27 101 47 31 49 33 V250 42L 27L 5 500-240 500-580/302-343 KSF500-240L 33 24 42 30 101 47 31 49 33 V250 42L 30L 5 500-300 500-580/340-400 KSF500-300L 33 24,5 42 31,5 105 47 35 49 37 V250 42L 32L 5 400-500 500-580/412-500 KSF500-400L 33 30 42 38 115 47 45 49 47 V250 42L 38L 5 630-240 630-730/302-343 KSF630-240L 39 24 50 30 111 60 35 62 37 V250 50L 30L 5 630-300 630-730/340-400 KSF630-300L 39 24,5 50 31,5 111 60 35 62 37 V250 50L 32L 5 630-400 630-730/412-500 KSF630-400L 39 30 50 38 121 60 45 62 47 V250 50L 38L 5 630-500 630-730/500-580 KSF630-500L 39 33 50 42 126 60 50 62 52 V250 50L 42L 4 s, s1 = insulation stripping length

Parallel through connectors, winding to flexible conductor 50 - 400 mm²

• Material: Cu 99,95%, tin plated Cu/Sn.

• For combination of copper winding and flexible or stranded conductors.

Marking example: 120 P22L Elpress logotype included 120 = mm² P22L = die no.

Flexible conductor mm² Winding conductor mm² Name W mm Ø H L t Tool Pcs/ pack Punch Matrix Note 25 9-37 KS50PL 15,2 14,5 12,5 30 1,8 V1300/V1300L 100 13P14,5DL 13P14,5ML Working range 34-62 mm² 35 31-52 KS70PL 17,7 17 15 30 2 V1300/V1300L 50 13P17DL 13P17ML Working range 66-87 mm² 50 38-62 KS95PL 21,1 20 18 30 2,5 V1300/V1300L 100 13P20PDL 13P20ML Working range 88-112 mm² 50 63-90 KS120PL 22,7 22 20 32 2,5 V1300/V1300L 50 13P22DL 13P22ML Working range 113-140 mm² 70 43-70 KS120PL 22,7 22 20 32 2,5 V1300/V1300L 50 13P22DL 13P22ML Working range 113-140 mm² 70 71-105 KS150PL 25,4 25 23 34 3 V1300/V1300L 50 13P25DL 13P25ML Working range 141-175 mm² 95 81-120 KS185PL 27,4 27 25 36 3 V1300/V1300L 25 13P27DL 13P27DL Working range 176-215 mm² 120 96-160 KS240PL 30,7 30 28 38 3 V1300/V1300L 25 13P30DL 13P30ML Working range 216-280 mm² 150 136-170 KS300PL 36,4 32 30 35 3 V250/V250L 25 P2532DL P2532ML Working range 286-320 mm² 185 170-255 KS400PL 43,2 38 34 50 4 V250/V250L 10 P2538DL P2538ML Working range 355-440 mm²

T-connectors with different area 25 - 500 mm² KTSF

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole.

• For winding, flexible and stranded Cu-conductors.

Marking example: Elpress Logotype

20 = Elpress Die no. 20 2x95F = 2 entries 95 mm²

F = KSF (Flexible, Stranded or Winding Conductors)

Conductor Cu mm² Winding mm² Name d mm d1 A B Die (Branch conductor) Die (through conductor) Tools Pcs/ pack 25-50 30-47, 69-103 KTSF25-50 8 11 69,5 80 11L 14,5L V600, V1300 20 50-150 69-103, 180-220 KTSF50-150 11 19 91 110 14,5L 25L V1300, V250 5 70-95 100-120, 113-161 KTSF70-95 13 15 77 100 17L 20L V600, V1300 10 70-120 100-120, 145-185 KTSF70-120 13 17 87 110 17L 22L V600, V1300 5 70-150 100-120, 180-220 KTSF70-150 13 19 91 110 17L 25L V1300, V250 5 70-240 100-120, 302-343 KTSF70-240 13 24 89 120 17L 30L V1300, V250 5 95-35 113-161, 45-70 KTSF95-35 15 9 70 93 20L 13L V600, V1300 10 95-50 113-161, 69-103 KTSF95-50 15 11 75 96 20L 14,5L V600, V1300 10 95-150 113-161, 180-220 KTSF95-150 15 19 92 110 20L 25L V1300, V250 5 95-240 113-161, 302-343 KTSF95-240 15 24 90 120 20L 30L V1300, V250 5 120-150 145-185, 180-220 KTSF120-150 17 19 92 120 22L 25L V1300, V250 5 120-185 145-185, 220-265 KTSF120-185 17 21 96 120 22L 27L V1300, V250 5 150-50 180-220, 69-103 KTSF150-50 19 11 80 124 25L 14,5L V1300, V250 10 150-95 180-220, 113-161 KTSF150-95 19 15 83 124 25L 20L V1300, V250 8 185-35 220-265, 45-70 KTSF185-35 21 9 80 105 27L 13L V1300, V250 6 185-50 220-265, 69-103 KTSF185-50 21 11 85 105 27L 14,5L V1300, V250 6 185-95 220-265, 113-161 KTSF185-95 21 15 88 110 27L 20L V1300, V250 6 185-150 220-265, 180-220 KTSF185-150 21 19 97 124 27L 25L V1300, V250 6 240-35 302-343, 45-70 KTSF240-35 24 9 80 105 30L 13L V1300, V250 5 240-50 302-343, 69-103 KTSF240-50 24 11 85 129 30L 14,5L V1300, V250 6 240-95 302-343, 113-161 KTSF240-95 24 15 88 129 30L 20L V1300, V250 6 240-120 302-343, 145-185 KTSF240-120 24 17 89 129 30L 22L V1300, V250 5 240-150 302-343, 180-220 KTSF240-150 24 19 97 129 30L 25L V1300, V250 5 240-185 302-343, 220-265 KTSF240-185 24 21 99 129 30L 27L V1300, V250 4 240-400 302-343, 412-500 KTSF240-400 24 30 129 154 30L 38L V1300, V250 2 300-150 340-400, 180-220 KTSF300-150 24,5 19 98 130 32L 25L V1300, V250 4 400-35 412-500, 45-70 KTSF400-35 30 9 92 160 38L 13L V250 4 400-50 412-500, 69-103 KTSF400-50 30 11 97 160 38L 14,5L V250 4 400-95 412-500, 113-161 KTSF400-95 30 15 99 170 38L 20L V250 4 400-150 412-500, 180-220 KTSF400-150 30 19 103 175 38L 25L V250 2 400-185 412-500, 220-265 KTSF400-185 30 21 111 180 38L 27L V250 2 400-240 412-500, 302-343 KTSF400-240 30 24 112 190 38L 30L V250 2 400-300 412-500, 340-400 KTSF400-300 30 24,5 108 190 38L 32L V250 2 500-35 500-580, 45-70 KTSF500-35 33 9 92 160 42L 13L V250 2 500-50 500-580, 69-103 KTSF500-50 33 11 97 160 42L 14,5L V250 2 500-95 500-580, 113-161 KTSF500-95 33 15 100 170 42L 20L V250 2 500-150 500-580, 180-220 KTSF500-150 33 19 107 180 42L 25L V250 2 500-185 500-580, 220-265 KTSF500-185 33 21 111 180 42L 27L V250 2 500-240 500-580, 302-343 KTSF500-240 33 24 112 200 42L 30L V250 2 500-300 500-580, 340-400 KTSF500-300 33 24,5 113 200 42L 32L V250 2 500-400 500-580, 412-500 KTSF500-400 33 30 135 200 42L 38L V250 2

T-connectors 110°, 35 - 400 mm² KTSF

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole.

• For winding, flexible and stranded Cu-conductors.

Marking example: 14,5 3x50F Elpress logotype included

14,5 = die no. 3x = no. of conductor entries 50 = mm² F = type KSF

T-connectors 35 - 630 mm² KTSF

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole. For Cu-conductors; flexible, stranded and winding.

Marking example: 14,5 3x50F Elpress logotype included

14,5 = die no. 3x = no. of conductor entries 50 = mm²

F = type KSF, flexible, stranded and winding conductors

Conductor Cu mm² Winding mm² Name d mm A B Die Tools Pcs/ pack 35 45-70 KTSF35-110GR 9 63 87 13L V600, V1300 20 50 69-103 KTSF50-110GR 11 66 96 14,5L V600, V1300 20 70 100-120 KTSF70-110GR 13 80 100 17L V600, V1300 10 95 113-161 KTSF95-110GR 15 84,5 103 20L V600, V1300 6 120 145-185 KTSF120-110GR 17 91 120 22L V600, V1300 6 150 180-220 KTSF150-110GR 19 104 124 25L V1300, V250 4 185 220-265 KTSF185-110GR 21 112 124 27L V1300, V250 2 240 302-343 KTSF240-110GR 24 116 129 30L V1300, V250 2 300 340-400 KTSF300-110GR 24,5 119 130 32L V1300, V250 2 400 412-500 KTSF400-110GR 30 177 190 38L V250 3

Conductor Cu mm² Winding mm² Name d mm A B Die Tools Pcs/ pack 35 45-70 KTSF35 9 63 87 13L V600, V1300 20 50 69-103 KTSF50 11 70 96 14,5L V600, V1300 20 70 100-120 KTSF70 13 74 100 17L V600, V1300 10 95 113-161 KTSF95 15 77 103 20L V600, V1300 10 120 145-185 KTSF120 17 87,5 120 22L V600, V1300 6 150 180-220 KTSF150 19 92 124 25L V1300, V250 6 185 220-265 KTSF185 21 96 124 27L V1300, V250 6 240 302-343 KTSF240 24 100 129 30L V1300, V250 4 300 340-400 KTSF300 24,5 101,5 130 32L V1300, V250 4 400 412-500 KTSF400 30 130 190 38L V250 2 500 500-580 KTSF500 33 134,5 200 42L V250 2 630 630-730 KTSF630 39 168 235 50L V250 2

Tube terminals 0,75 - 10 mm² KR

• Material: Cu 99.95%, tin plated Cu/Sn.

• For stranded (class 2) up to multi stranded (class 6) Cu-conductors, according to IEC 60228.

• UL approved (1.5 -10 mm²).

Marking example KR: 10 10 10 = mm² 10 = Plate hole for M10

Through connectors 0,75 - 10 mm² KS

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole and cable stop.

• For stranded (class 2) up to multi stranded (class 6) Cu-conductors, according to IEC 60228.

• UL approved (1.5 -10 mm²).

Marking example: 8 10 Elpress logotype included 8 = die no. 10 = mm²

mm² Name Screw W mm d t N N1 L s P Tool Inspection hole Die Pcs/ pack 0,75 KR0,75-3 3 6 1,3 0,85 3,2 3,8 16 7,5 7 DKB0325, DKB0760 100 0,75 KR0,75-4 4 6 1,3 0,8 3,2 3,5 17 7,5 6,7 DKB0325, DKB0760 100 1,5 KR1,5-3 3 6,5 1,8 1 3,4 3,6 16 7,5 7 DKB0325, DKB0760 100 1,5 KR1,5-4 4 6,5 1,8 0,9 4,2 3,8 17 7,5 8 DKB0325, DKB0760 100 1,5 KR1,5-5 5 7,5 1,8 0,85 4,8 4,7 18 7,5 9,5 DKB0325, DKB0760 100 2,5 KR2,5-3 3 7,5 2,3 1,3 3,5 4,1 17 7 7,6 DKB0325, DKB0760 100 2,5 KR2,5-4 4 7,5 2,3 1,3 4,2 4,1 18 7 8,3 DKB0325, DKB0760 100 2,5 KR2,5-5 5 8,5 2,3 1,1 4,8 4,8 19 7 9,6 DKB0325, DKB0760 100 2,5 KR2,5-6 6 8,5 2,4 1,1 5,1 5,8 19 7 10,9 DKB0325, DKB0760 100 4 KR4-4 4 8,5 3 1,5 4,2 5,8 22 8,5 10 GWB4099, ES2258 100 4 KR4-5 5 9 3 1,5 4,8 5,2 22 8,5 10 GWB4099, ES2258 100 4 KR4-6 6 9,9 3 1,3 5 7 23 8,5 12 GWB4099, ES2258 100 6 KR6-4 4 9,5 4 1,7 4 6 22 8,5 10 GWB4099, ES2258 100 6 KR6-5 5 9,5 4 1,7 5 6 22 8,5 11 GWB4099, ES2258 100 6 KR6-6 6 9,9 4 1,6 5,5 6,5 23 8,5 12 GWB4099, ES2258 100 6 KR6-8 8 13 4 1,2 7 10 30 8,5 17 GWB4099, ES2258 100 10 KR10-5 5 11,5 5 2,9 6 7,5 29 11 13,5 GWB4099, PVL350, V600, V1300, V250 8 100 10 KR10-6 6 11,5 5 3 6 7,5 29 11 13,5 GWB4099, PVL350, V600, V1300, V250 Yes 8 100 10 KR10-8 8 13,5 5 2,3 7,5 8,5 33 11 16 GWB4099, PVL350, V600, V1300, V250 Yes 8 100 10 KR10-10 10 16 5 2 8 10 34 11 18 GWB4099, PVL350, V600, V1300, V250 Yes 8 100 10 KR10-12 12 18,5 5 1,7 10 13,5 41 11 23,5 GWB4099, PVL350, V600, V1300, V250 Yes 8 100 t = plate thickness, s = strip length

mm² Name d mm D L s Tool Die Pcs/pack 0,75 KS0,75 1,3 2,8 14 7 DKB0325, DKB0760 100 1,5 KS1,5 1,8 3,3 14 7 DKB0325, DKB0760 100 2,5 KS2,5 2,3 4,2 16 8 DKB0325, DKB0760 100 4 KS4 3 5 19 9 GWB4099, ES2258 100 6 KS6 4 6 19 9 GWB4099, ES2258 100 10 KS10 5 8 30 15 PVL350, V600, V1300, V250 8 100 s = strip length

Parallel through connectors 20 - 630 mm² KS-P

• Material: Cu 99.95%, tin plated Cu/Sn.

• Cable inspection hole.

• For stranded (class 2) up to multi stranded (class 6) Cu-conductors, according to IEC 60228.

Marking example: 17 70 Elpress logotype included 17 = die no. 70 = mm²

CUT through connectors for solid conductors 6 - 16 mm²

• Material: Cu 99,95%, tin plated, Cu/Sn.

• For solid conductors.

Conductor Cu mm² Name d mm D L Tool Die Pcs/ pack 20-31 KS25P 8 11 14 PVL350, V600, V1300, V250 11 200 31-41 KS35P 9 13 16 PVL350, V600, V1300, V250 13 100 45-56 KS50P 11 14,5 18 PVL350, V600, V1300, V250 14,5 100 60-85 KS70P 13 17 18 PVL350, V600, V1300, V250 17 100 86-111 KS95P 15 20 20 V600, V1300, V250 20 100 111-130 KS120P 17 22 26 V600, V1300, V250 22 100 136-166 KS150P 19 25 26 V600, V1300, V250 25 50 170-210 KS185P 21 27 28 V1300, V250 27 50 220-255 KS240P 24 30 30 V1300, V250 30 25 300 KS300P 26 32 35 V1300, V250 32 50 400 KS400P 30 38 50 V1300, V250 38 50 500 KS500P 33 42 52 V250, V1470 42 10 630 KS630P 39 50 62 V250, V1470 50 10

mm² Name d mm D L s Tool Pcs/ pack 6 CUT6 3 5 27 12 ES2258, T2258 100 10 CUT10 4 6 27 12 ES2258, T2258 100 16 CUT16 5 8 35 15,5 ES2258, T2258 100 s = strip length

Al-Cu bimetallic through connectors 10 - 240 mm²

• Connect Al winding conductors to Cu stranded and flexible conductors.

• Al-range winding 20-310 mm². Cu-range 10-185 mm².

Stranded Al mm² Conductor Cu mm² Winding mm² Name d mm d1 D D1 L s s1 Tool Die (Cu) Matrix and Punch (Al) Pcs/ pack 16-25 10-16 - AKS1625-1016 6,2 6 8,3 7,5 36,5 19 17 V600 EW1025 TBKA9-11,5 48 30 10 20-40 AKS30L-10 7,5 4,9 13 7,9 48,5 29 16 V600, V1300 B8 13P13M2/D2 50 30 16 20-40 AKS30L-16 7,5 5,9 13 8,9 48,5 29 17 V600, V1300 B9L 13P13M2/D2 50 35 10 35-50 AKS35L-10 8,5 4,9 20 7,9 69 45 16 V1300 B8 13P20M2/D2 5 35 16 35-50 AKS35L-16 8,5 5,9 20 8,9 69 45 17 V1300 B9L 13P20M2/D2 5 35 25 35-50 AKS35L-25 8,5 7,9 20 10,9 74 45 20 V1300 B11L 13P20M2/D2 5 50 10 50-70 AKS50L-10 9,6 4,9 20 7,9 69 45 16 V1300 B8 13P20M2/D2 5 50 16 50-70 AKS50L-16 9,6 5,9 20 8,9 69 45 17 V1300 B9L 13P20M2/D2 5 50 25 50-70 AKS50L-25 9,6 7,9 20 10,9 74 45 20 V1300 B11L 13P20M2/D2 5 50 35 50-70 AKS50L-35 9,6 8,8 20 12,8 79 45 21 V1300 B13L 13P20M2/D2 5 50 50 50-70 AKS50L-50 9,6 10,8 20 14,3 83,5 45 25 V1300 B14,5L 13P20M2/D2 5 70 35 70-100 AKS70L-35 11,3 8,8 20 12,8 79 45 21 V1300 B13L 13P20M2/D2 5 70 50 70-100 AKS70L-50 11,3 10,8 20 14,3 83,5 45 25 V1300 B14,5L 13P20M2/D2 5 70 70 70-100 AKS70L-70 11,3 12,8 20 16,8 85,5 45 27 V1300 B17L 13P20M2/D2 5 95 35 100-125 AKS95L-35 12,5 8,8 25 12,8 94,5 60 21 V1300 B13L 13P25M2/D2 5 95 50 100-125 AKS95L-50 12,5 10,8 25 14,3 99 60 25 V1300 B14,5L 13P25M2/D2 5 95 70 100-125 AKS95L-70 12,5 12,8 25 16,8 101 60 27 V1300 B17L 13P25M2/D2 5 120 50 125-160 AKS120L-50 14 10,8 25 14,3 99 60 25 V1300 B14,5L 13P25M2/D2 5 120 70 125-160 AKS120L-70 14 12,8 25 16,8 101 60 27 V1300 B17L 13P25M2/D2 5 120 95 125-160 AKS120L-95 14 14,8 25 19,8 101,5 60 27 V1300 B20L 13P25M2/D2 5 150 70 160-216 AKS150L-70 15,8 12,8 25 16,8 101 60 27 V1300 B17L 13P25M2/D2 5 150 95 160-216 AKS150L-95 15,8 14,8 25 19,8 101,5 60 27 V1300 B20L 13P25M2/D2 5 150 120 160-200 AKS150L-120 15,8 16,8 25 21,8 106,5 60 32 V1300 B22L 13P25M2/D2 5 185 95 216-270 AKS185L-95 17,6 14,8 32 19,8 100,5 60 27 V1300 B20L 13P32M2/D2 5 185 120 216-270 AKS185L-120 17,6 16,8 32 21,8 105,5 60 32 V1300 B22L 13P32M2/D2 5 185 150 216-270 AKS185L-150 17,6 18,8 32 24,8 106 60 32 V1300 B25L 13P32M2/D2 5 240 120 270-310 AKS240L-120 19,8 16,8 32 21,8 105,5 60 32 V1300 B22L 13P32M2/D2 5 240 150 270-310 AKS240L-150 19,8 18,8 32 24,8 106 60 32 V1300 B25L 13P32M2/D2 5 240 185 270-310 AKS240L-185 19,8 20,8 32 26,8 106,5 60 32 V1300 B27L 13P32M2/D2 5 s,

s1 = insulation stripping length

Earthing and braids

Flat, flexible braids

Earthing braids with flat, twined, highly flexible Cu-conductor, uncoated 0,09 - 400 mm².

• Broad range of flexible and highly flexible flat earth braids.

• Customer unique solutions are available.

• Braids in other materials, such as stainless steel, aluminium or insulated connectors could also be provided.

Uncoated earthing braid: FJCU area (mm²) - length (mm) - Hole size

Example: FJCU50-100-8

Flat, flexible braids (tin plated)

Earthing braids with flat, twined, highly flexible Cu-conductor, tin plated 0,09 - 400 mm².

• Broad range of flexible and highly flexible flat earth braids.

• Customer unique solutions can be made.

• Braids in other material, such as stainless steel, aluminium or insulated connectors are also available.

Tin plated earthing braid: FJCUSN area (mm²) - length (mm) - Hole size

Example: FJCUSN50-100-8

Round, flexible connections (un-insulated)

Un-insulated slacks with many possibilities to connect Elpress terminals. Such as KSF/KRF Cu tube terminal range, AlCu bi-metallic range AKK/AKS or Al range AK/AS.

Round, twined, highly flexible Cu-conductor, tin plated or uncoated, 0,06 - 600 mm².

• Broad range of flexible and highly flexible flat earth braids.

• Customer unique solutions available.

• Braids in other materials, such as stainless steel, aluminium or insulated connectors are also available.

Uncoated earthing braid (round): FLCU area (mm²) - length (mm) - Hole size

Example: FLCU50-100-8

Round, flexible connections (un-insulated, tin plated)

Un-insulated slacks with many possibilities to connect Elpress terminals. Such as KSF/KRF Cu tube terminal range, AlCu bi-metallic range AKK/AKS or Al range AK/AS.

Round, twined, highly flexible Cu-conductor, tin plated or uncoated, 0,06 - 600 mm².

• Broad range of flexible and highly flexible flat earth braids.

• Customer unique solutions could be made.

• Braids in other materials, such as stainless steel, aluminium or insulated connectors could also be provided.

Tin plated earthing braid (round): FLCUSN area (mm²) - length (mm) - Hole size

Example: FLCUSN50-100-8

Round, flexible connections (insulated)

Insulated slacks with many possibilities to connect Elpress terminals. Such as KSF/KRF Cu tube terminal range, AlCu bi-metallic range AKK/AKS or Al range AK/AS.

Round, twined, highly flexible Cu-conductor, tin plated or uncoated, 0,06 - 600 mm².

• Customer unique slack, possible to make according to customer requirements.

• Insulated braids in other materials, such as stainless steel, aluminium or insulated connectors could also be provided.

Insulated, uncoated slacks: FKCU area (mm²) - length (mm) - Hole size

Example: FKCU50-100-8

Slacks Type Conductor mm² Hole Description Used with (combine terminals freely) KRF CU 16-800 M range Terminal CU conductors KSF CU 16-800 Connector CU conductors AKS AL/CU 10-400/10-300 Connector CU and/or AL conductors AKK AL 16-1200 M range Terminal AL conductors AKP AL 16-1200 Pin terminal AL conductors KR CU 0,75-10 M range Terminal CU conductors KS CU 0,75-10 Connector CU conductors

Common information

Hydraulic crimp systems

Elpress hydraulic crimp systems crimp from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these devices are integrated. Wide range of accessories available for crimping, pre-rounding, cutting etc. Together with the matching terminals, the complete system is formed. Both pumps and hand-held tools have, with a few exceptions, quick feed function that means crimping can begin after a few pump strokes.

The systems have a built-in ratchet lock that ensures that an initial crimp is completed and thus produces results with the best characteristics. Pumps that can be connected to the different crimp heads provide the option of comfortable work in difficult situations and with maximum flexibility.

System Material mm2 0,25 0,5 0,75 1,5 2,5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000 1200 DKB0325 Cu DKB0760 Cu GWB4099/ GWB4099C Cu ES2258 Cu Cut 6-16 mm² T2258 Cu Cut 6-16 mm² PVL350 Cu 600 Cu winding 30-185 mm2 1300 Cu winding 30-343 mm2 Al winding 20-310 250 Cu winding 180-730 mm2 Al ES2258LB5 tap changers (CU) 30A ES2258LB7 tap changers (CU) 63A PVL130L tap changers (CU) 30A, 63A

Manual crimping tools for off-load transformer tap changers

ES2258LB5

A tested and certified crimping tool for solid copper wires of diameters

2.5-2.8 mm in combination with 5 mm transformer tap changer connectors.

Crimp geometry

ES2258LB7

A tested and certified crimping tool for solid copper wires of diameter 4.0 mm in combination with 7 mm transformer tap changer connectors.

Crimp geometry

Name Crimp geometry Net weight (kg) Length mm Width ES2258LB5 Hexagonal 0,645 300 30

Name Crimp geometry Net weight (kg) Length

Width ES2258LB7 Hexagonal 0,645 300 30

Manual crimping tools for Cu connectors

DKB0325 Crimp geometry

Tested and certified mechanical hand tool for indent crimping Cu terminals

Crimp geometry

Tested and certified mechanical hand tool for indent crimping Cu terminals

GWB4099 and GWB4099C

Tested and certified mechanical Miniforce hand tool for W crimping un-insulated ring, fork and pin terminals as well as tube terminals and through connectors type KR and KS 4-10 mm².

0.25-2.5 mm². mm² Name Crimp geometry Net weight (kg) Length mm Width 0,25-2,5 DKB0325 Tab 0,444 192 66

DKB0760 Crimp geometry

0.75-6

mm² Name Crimp geometry Net weight (kg) Length mm Width 0,75-6 DKB0760 Tab 0,445 192 66

mm².

mm² Name Crimp geometry Net weight (kg) Length mm Width 4-10 GWB4099 W 0,542 203 76 4-10 GWB4099C W 0,560 256 80

Crimp geometry

ES2258

Tested and certified mechanical hand-held tool for crimping Cu-terminals, type CUT 6-16 mm² and KR/KS 4-10 mm².

T2258

Tested and certified mechanical hand-held tool for crimping Cu-terminals, type CUT 6-16 mm² and KR/KRF/KS/KSF 4-16 mm².

Crimp geometry

mm² Name Crimp geometry Net weight (kg) Length mm Width 4-16 ES2258 Hexagonal 0,660 300 30

mm² Name Crimp geometry Net weight (kg) Length mm Width 4-16 T2258 Punch, Hexagonal 0,650 304 30

Battery powered crimp tool for crimping off-load transformer tap changers

PVL130L

Tested and certified tool with a high performance Li-Ion battery that streamlines your work with its improved battery capacity. To be used for crimping of standard tap changers for 30A and 63 A.

Properties:

• easy-to-open crimp head for rapid die change

• slim ergonomic design - good accessibility even in confined areas

• Li-Ion battery (12 V MAX, 2,0 Ah), charge time approx. 40 minutes

• rapid crimp operation 2 seconds (depending on material)

• dies for crimping of special through connectors

• delivered in a plastic case ,with extra space for accessories

Crimp geometry

Dies for PVL130L

Dies for crimping solid copper wires in combination with transformer tap changer connectors.

• Designed for standardized 30 A and 63 A tap changers.

• Hexagonal crimp geometry.

ø Name Number of crimps Die holder required Note

5 LB5 1 No

7 LB7 1 No

Name Crimp geometry Net weight (kg) Length Width Height Delivered PVL130L Hexagonal 1,50 330 85 60 with battery and charger PVL130LDBKIT Hexagonal 1,69 330 85 60 Includes PVL130L, LB5, LB7 and

with charger PVL130L-US Hexagonal 1,50 330 85 60 with battery and US-charger PVL130L-WOBC Hexagonal 0,91 330 85 60 without battery and charger

two batteries

For standardized

30 A and 63 A tap changers

For standardized

30 A and 63 A tap changers

Battery powered tool PVL350 for crimping Cu-terminals

PVL350 - Elpress Mini

Battery-powered tool for crimping tube terminals and through connectors of type KRF/KSF up to 70 mm² with special ”MB” dies.

Properties:

• opening head for easy die changes and good accessibility

• High-performance 12 V Li-Ion battery with indication of charge status

• very good accessibility and ergonomics

• opening, rotatable ”flip top” head for easy die changes and slim crimp head for good accessibility

• rapid crimp sequence 3-4 seconds

• approx. 100-180 crimps/battery charges (depending on temp, frequency etc.)

• 2-component housing with grip-friendly protection. One-handed operation for easy control of all tool functions

• Lightweight, and rapid crimping sequence for maximum efficiency

• Automatic return of the dies when crimping is complete

Crimp geometry

Crimp dies to PVL350 (KR/KRF, KS/KSF, CUT, C-sleeves)

Supplied in pairs. For hexagonal crimping of Cu 4-70 mm². CUT sleeves 6-16 mm² crimped with MB4016.

mm² Name Crimp geometry Net weight (kg) Length mm Width Height Delivered 4-95 PVL350 Hexagonal 1,60 360 116 75 with charger 230VAC 4-95 PVL350-US Hexagonal 1,60 360 116 75 with charger 115VAC 4-95 PVL350-WOBC Hexagonal 1,10 360 116 75 without battery and charger

mm² Name Number of crimps Net weight (kg) Used for 10 - 16 MB8 1 0,086 KR/KS 10 mm² and KRD/KSD 10-16 mm² 16 - 25 MB9 1 0,085 KRF/KSF 16 mm² and KRD/KSD 25 mm² 25 - 35 MB11 2 0,083 KRF/KSF 25 mm² and KRD/KSD 35 mm² 35 MB13 2 0,081 KRF/KSF 35 mm² 50 MB14,5 2 0,080 KRF/KSF 50 mm² 70 - 95 MB17 3 0,075 KRF/KSF 70 mm² and KRD/KSD 95 mm² 4-10 MB4016 1 0,082 KR/KS 4-10 mm², CUT sleeves 6-16 mm²

Die pair MB11 for PVL350.

System 600 for crimping Cu and Al terminals

V600

Tested and certified crimp head for crimping Cu terminals, type KR/KS 10 mm², KRF/KSF 16-150 mm², Cu windings 25-185 mm², Al-terminals 16-25 mm² (-35 solid). Can be used together with the foot pump P4000 or the electrically powered pump PS710E/R (battery powered version of PS710E is also available).

Properties:

• working pressure 63 MPa (630 bar)

• crimp force 55 kN

• robust fabric bag with room for 10 dies included

Crimp geometry

V611

Tested and certified hydraulic hand-held tool for crimping Cu-terminals, type KR/KS 10 mm², KRF/KSF 16-150 mm², Cu windings 25-185 mm², Al-terminals 16-25 mm² (-35 solid).

• Properties:

• fast-feed to crimp engagement provides short crimp times

• crimp force 60 kN

• delivered in sturdy textile bag

Crimp geometry

mm² Name Crimp geometry Net weight (kg) Length mm Width Height 10-150 V600 Punch, Hexagonal 2,45 189 74 53

mm² Name Crimp geometry Net weight (kg) Length mm Width Height 10-150 V611 Punch, Hexagonal 2,60 425 115 53

PVX611/PVX611DB

Tested and certified battery-powered crimp tool for crimping Cu-terminals, type KR/KS 10 mm², KRF/KSF 16-150 mm², Cu windings 25-185 mm², Al-terminals 16-25 mm² (-35 solid). PVX611DB has an extra battery.

Properties:

• protects against dirt and dust through the closed chassis

• ergonomic design ensures optimum balance in the user’s hand

• swivel opening crimp fork

• crimp force control using pressure monitoring

• one handed operation for easy work

• LED lighting for easier work

• fast-forward feeding for more efficient crimping

• display with information about the tool and service intervals

• crimp monitoring via display when the correct pressure/complete crimping is not achieved (warning light LED and signal)

• Li-Ion battery included (18 V, 2,0 Ah)

Crimp geometry

mm² Name Crimp geometry Net weight (kg) Length mm Width Height Delivered 10-240 PVX611 Punch, Hexagonal 5,50 414 116 75 with charger 230VAC 10-240 PVX611DB Punch, Hexagonal 5,85 414 116 75 with 2 batteries 10-240 PVX611-US Punch, Hexagonal 5,50 414 116 75 with charger 115VAC 10-240 PVX611-WOBC Punch, Hexagonal 3,90 414 116 75 without battery and charger

Accessories for system 600

• For crimping Cu terminals 10-150 mm² or Cu windings 25-185 mm².

• The KB/TB dies below are intended for Cu-terminals, type KR/KRF and KS/KSF, together with both stranded and multi-stranded Cu conductors of Class 2 and 5 respectively according to IEC 60228.

• TB/KB (L) are intended for Cu-windings.

• Be sure to use dies exactly matching the terminal.

Crimp dies for KRF/KSF

For Cu-terminals, hexagonal crimping. Supplied in pairs. The TB dies below are intended for Cu-terminals, type KRF/KSF, together with Cu conductor according to IEC 60228.

Crimp

Die pair TB9-13 for V600, V611 and PVX611. Die pair KB22 for V600, V611 and PVX611.

Crimp sequence for three crimps.

Crimp dies for winding conductors KRF/KSF (L)

For Cu-terminals, hexagonal crimping. Supplied in pairs. The TB dies below are intended for Cu-terminals, type KRF/KSF (L), together with Cu winding conductors.

Crimp dies for Al and Cu, V600 system

For crimping 16-25 mm² Al and 10-16 mm² Cu. Used in the V600 system.

Punch crimping. The dies below are intended to be used together with Cu/Al conductors according to IEC 60228.

sequence for two crimps.

mm² Name Number of crimps Net weight (kg) Die holder required Note 10 / 70 TB8-17 1, 2 0,138 No Used for KRF/KSF 10 mm² and 70 mm² respectively 16 / 35 TB9-13 1 0,149 No Used for KRF/KSF 16 mm² and 35 mm² respectively 25 / 50 TB11-14,5 1 0,149 No Used for KRF/KSF 25 mm² and 50 mm² respectively 10 / 95 TB7-20 1, 2 0,135 No Used for KRF/KSF 10 mm² and 95 mm² respectively 120 KB22 3 0,150 No 150 KB25 3 0,147 No

mm² Winding mm² Name Number of crimps Net weight (kg) Die holder required 25 30-47 TB11L 1 0,149 No 35 45-70 TB13L 1 0,147 No 50 69-103 TB14,5L 1 0,144 No 70 100-120 TB17L 2 0,134 No 95 113-161 TB20L 2 0,131 No 120 145-185 KB22L 3 0,139 No

mm² Name Number of crimps Net weight (kg) Note Cu 10 - 16, / AL 16 - 25 TBKA9-11,5 1 0,140 Used to crimp AS1625 and AKS1625-1016

V1300

Tested and certified crimp head for crimping Cu-terminals, type KR/KRF and KS/KSF 10400 mm², Cu-windings 25-343 mm², Al-terminals 16-400 mm² (-240 solid). Used in conjunction with foot pump P4000 or the electrically powered pump PS710 (battery powered version of PS710E is also available).

Properties:

• crimps Cu-conductors of type KRF-L up to 240 mm²

• working pressure 63 MPa (630 bar)

• crimp force 130 kN (13 tons)

• versatile and easy-to-use steel crimp head

V1300L

Tested and certified crimp head for crimping Cu-terminals, type KR/KRF and KS/KSF

10-400 mm², Cu-windings 25-343 mm², Al-terminals 16-400 mm² (-240 solid). Used in conjunction with foot pump P4000 or the electrically powered pump PS710 (battery powered version of PS710E is also available).

Properties:

• crimps Cu-conductors of type KRF-L up to 240 mm²

• equipped with protective rubber coating on top of the fork and oil spray safety protection cap

• working pressure 63 MPa (630 bar)

• crimp force 130 kN (13 tons)

• versatile and easy-to-use steel crimp head

V1300 crimp head V1300A Crimp geometry

mm² Name Crimp geometry Net weight (kg) Length mm Width Height Note 10-400 V1300 Hexagonal, Punch 3,46 270 82 75 10-400 V1300A Hexagonal, Punch 3,40 270 82 75 Closed fork design, for longer durability

Crimp geometry

mm² Name Crimp geometry Net weight (kg) Length mm Width Height 10-400 V1300L Hexagonal, Punch 3,40 270 82 75

PVX1300/PVX1300DB

Tested and certified battery-powered crimp gun for contact crimping Cu-terminals, type KR/KRF and KS/KSF 10-400 mm², Cu-windings 25-343 mm², Al-terminals 16-400 mm² (-240 solid).

Properties:

• crimps Cu-conductors of type KRF-L up to 240 mm²

• ergonomic design ensures optimum balance in the user’s hand

• crimp monitoring with warning light and signal when the correct pressure/full crimp is not achieved

• LED work lighting

• crimp force 124 kN (13 tons)

• crimps/charging: 60-120 depending on size and temperature

• crimp time: 4-12s depending on size

• usage temperature -20°C to +40°C

• Li-Ion Makita, 5.0 Ah, 18V

• charger Li-Ion Makita, charging time 22 min CASE ADVANCED

V1300C2

Crimp head for crimping Cu-terminals, type KR/KRF and KS/KSF 10-400 mm² and Cu-windings 25-343 mm². Used in conjunction with foot pump P4000 or battery and mains powered pump PS710 (battery powered version of PS710E is also available).

Properties:

• working pressure 63 MPa (630 bar)

• crimp force 130 kN

• versatile and easy to use

Crimp geometry

Crimp geometry mm² Name Crimp geometry Net weight (kg) Length Width Height Delivered 10-400 PVX1300-ADV Punch, Dual, Hexagonal 14,2 412 319 75 in CASE ADV 10-400 PVX1300DB-ADV Punch, Dual, Hexagonal 14,8 412 319 75 with 2 batteries and CASE ADV 10-400 PVX1300-WOBC-ADV Punch, Dual, Hexagonal 12,4 412 319 75 in CASE ADV and without battery and charger 10-300 PVX1300-ADV-US Punch, Dual, Hexagonal 14,2 412 319 75 with battery and US-charger

Crimp head V1300C2 with dies.

mm² Name Crimp geometry Net weight (kg) Length mm Width Height 10-400 V1300C2 Hexagonal, Oval 4,60 297 145 75

PVX1300C2/PVX1300C2DB

Tested and certified battery-powered crimp gun for crimping Cu-terminals, type KR/KRF and KS/KSF 10-400 mm², Cu-windings 25-343 mm².

Properties:

• ergonomic design ensures optimum balance in the user’s hand

• crimp monitoring with warning light and signal when the correct pressure/full crimp is not achieved

• LED work lighting

• crimp force 124 kN (13 tonnes)

• usage temperature -20°C to +40°C

• Li-Ion Makita, 5.0 Ah, 18V

• charger Li-Ion Makita, charging time 22 min

mm² Name Crimp geometry Net weight (kg) Length mm Width Height Delivered 10-400 PVX1300C2-ADV Dual, Hexagonal 15,1 399 319 75 in CASE ADV 10-400 PVX1300C2DB-ADV Dual, Hexagonal 15,1 399 319 75 2 batteries and CASE ADV 10-400 PVX1300C2-WOBC-ADV Dual, Hexagonal 5,6 399 319 75 without battery and charger

Crimp geometry

Accessories for system 1300

• The B (L) dies below are intended for Cu-terminals, type KR/KRF and KS/KSF, together with Cu winding conductors.

• Be sure to use dies exactly matching the terminal.

Pre-rounding of Cu

For pre-rounding copper winding conductors to fit the connector in question.

Crimp dies for Cu

Supplied as a pair. For hexagonal crimping of Cu terminals and connectors. May be used on flexible (class 5) as well as stranded (class 2) conductors and for winding conductors in Transformer manufacture.

Crimp dies for crimping of KS-PL

For crimping of parallel copper through connectors for transitions between winding- and flexible conductors.

mm² Winding mm² Matrix Punch Number of crimps Matrix holder required Punch holder required 25 30-47 13R8ML-B 13R8DL-B 1 No No 35 45-70 13R9ML-B 13R9DL-B 1 No No 50 69-103 13R11ML-B 13R11DL-B 1 No No 70 100-120 13R13ML-B 13R13DL-B 1 No No 95 113-161 13R15ML-B 13R15DL-B 1 No No 120 145-185 13R17ML-B 13R17DL-B 1 No No 150 180-220 13R19ML-B 13R19DL-B 1 No No

mm² Winding mm² Name Number of crimps Die holder required 10 13B8 1 No 16 13B9L 1 No 25 30-47 13B11L 1 No 35 45-70 13B13L 1 No 50 69-103 13B14,5L 1 No 70 100-120 13B17L 1 No 95 113-161 13B20L 1 No 120 145-185 13B22L 2 No 150 180-220 13B25L 2 No 185 220-265 13B27L 2 No 240 302-343 13B30L 2 No

mm² Winding mm² Matrix Punch Number of crimps Matrix holder required Punch holder required 50 69-103 13P14,5ML 13P14,5DL 1 No No 70 100-120 13P17ML 13P17DL 1 No No 95 113-161 13P20ML 13P20DL 1 No No 120 145-185 13P22ML 13P22DL 1 No No 150 180-220 13P25ML 13P25DL 1 No No 185 220-265 13P27ML 13P27DL 1 No No 240 302-343 13P30ML 13P30DL 1 No No

Crimp dies (C fork) for Cu winding

Supplied in pairs.

For Cu-terminals with winding conductors, hexagonal crimping. Used without a die holder.

May be used on flexible (class 5) as well as stranded (class 2) conductors and for winding conductors in Transformer manufacture.

Crimp sequence for three crimps.

Pre-rounding of Al

For pre-rounding aluminium winding conductors to fit the connector in question.

Punch and matrix for Al

For crimping of the aluminium side of the bimetallic connector.

mm² Name Number of crimps Net weight (kg) Die holder required 50 13CB14,5L 1 0,500 No 70 13CB17L 1 0,480 No 95 13CB20L 1 0,497 No 120 13CB22L 2 0,537 No 150 13CB25L 2 0,500 No 185 13CB27L 2 0,478 No 240 13CB30L 2 0,500 No

The nominal size of the connection Winding mm² Matrix Punch Number of crimps Matrix holder required Punch holder required 30 20-40 13R7.5ML-AL 13R7.5DL-AL 1 No No 35 35-50 13R8ML-AL 13R8DL-AL 1 No No 50 50-70 13R9ML-AL 13R9DL-AL 1 No No 70 70-100 13R10ML-AL 13R10DL-AL 1 No No 95 100-125 13R12ML-AL 13R12DL-AL 1 No No 120 125-160 13R13ML-AL 13R13DL-AL 1 No No 150 160-216 13R15ML-AL 13R15DL-AL 1 No No 185 216-270 13R17ML-AL 13R17DL-AL 1 No No 240 270-310 13R19ML-AL 13R19DL-AL 1 No No

Stranded Al mm² Winding mm² Matrix Punch Number of crimps Matrix holder required Punch holder required 30 20-40 13P13M2 13P13D2 1 No No 35-70 35-50, 50-70, 70-100 13P20M2 13P20D2 1 No No 95-150 100-125, 125-160, 160-216 13P25M2 13P25D2 1 No No 185-240 216-270, 270-310 13P32M2 13P32D2 1 No No

Storage box for system 1300

Case with space for tool V1300L and all necessary accessories to crimp Elpress Cu-and Al-terminals. The case has a solid moulded interior and can be used as a storage place in storage rooms or taken into the workplace.

Properties:

• IP67 rated, withstands dust and heavy impacts

• sturdy, form cut inserts

Name Net weight (kg) Depth mm Width Height Notes LV1300L-ADV 4,86 428 555 211 Empty storage box wit slots for crimp head V1300L and accessories

System 250 for crimping Cu and Al terminals

V250

Tested and certified crimp head for crimping Cu-terminals, type KRF/KSF 10-800 mm², Cu-windings 25-730 mm², Al-terminals 16-630 mm² (-300 solid). Used in conjunction with foot pump P4000 or the electrically powered pump PS710 (battery powered version of PS710E is also available).

Properties:

• working pressure 63 MPa (630 bar)

• crimp force 250kN (25 tons)

• large crimp area, 10-630 mm²

Crimp geometry

V250L

Properties:

• equipped with protective rubber coating on top of the fork and oil spray safety protection cap

• working pressure 63 MPa (630 bar)

• crimp force 250kN (25 tons)

• large crimp area, 10-630 mm²

Crimp geometry

mm² Name Crimp geometry Net weight (kg) Length mm Width Height 10-630 V250 Punch, Hexagonal 4,68 280 111 74

Accessories for system 250

• The B (L) dies below are intended for Cu-terminals, type KR/KRF and KS/KSF, together with Cu winding conductors.

• Be sure to use dies exactly matching the terminal.

Pre-rounding of Cu

For pre-rounding copper winding conductors to fit the connector in question.

Crimp dies for Cu

Supplied in pairs. For hexagonal crimping of Cu terminals and connectors. May be used on flexible (class 5) as well as stranded (class 2) conductors and for winding conductors in Transformer manufacture.

Storage box for system 250

Case with space for tool V250L and all necessary accessories to crimp Elpress Cu-and Al-terminals. The case has a solid moulded interior and can be used as a storage place in storage rooms or taken into the workplace.

Properties:

• IP67 rated, withstands dust and heavy impacts

• sturdy, form cut inserts

mm² Winding mm² Matrix Punch Number of crimps Matrix holder required Punch holder required 185 220-265 25R21ML 25R21DL 1 No No 240 302-343 25R24ML 25R24DL 1 No No 300 340-400 25R26ML 25R26DL 1 No No 400 412-500 25R30ML 25R30DL 1 No No 500 500-580 25R33ML 25R33DL 1 No No 630 630-730 25R39ML 25R39DL 1 No No

mm² Winding mm² Name Number of crimps Die holder required 150 180-220 B2525L 1 No 185 220-265 B2527L 1 No 240 302-343 B2530L 1 No 300 340-400 B2532L 1 No 400 412-500 B2538L 2 No 500 500-580 B2542L 2 No 630 630-730 B2550L 3 No

Name Net weight (kg) Depth mm Width Height LV250L-ADV 4,8366 428 555 211

System 350 for crimping Cu terminals

DV350

DV350 is a powerful and efficient crimp head with 35 tons crimp force. The head is used together with the electrically driven pump PS710 (the battery powered version, PS710E, is also available) or foot pump P4000, which makes the DV350 exellent for both mobile and stationary work.

Properties:

• Working pressure 63 MPa (630 bar)

• Crimp force 350 kN (35 tons)

• Large crimp area, 240-730 mm²

• Crimp dies for crimping copper 240-630 mm² (winding conductor 340-730 mm²)

• Delivered fixed on a solid foot with a handle

Accessories for system 350

Pre-rounding of Cu

Connector size, mm² Winding,

Crimp dies for Cu

Flexible, stranded, mm² Winding, mm² Dies No. Of crimps

Weight kg Height mm Width Length 16,6 210 150 356

300 340-400

400 412-500 35R30ML 35R30DL 500 500-580 35R33ML 35R33DL 630 800 630-730 35R39ML 35R39DL

mm² Matrix Punch

35R26ML 35R26DL

240 302-343 B3530L 1 300 340-400 B3532L 1 400 412-500 B3538L 1 500 500-580 B3542L 1 630 800 630-730 B3550L 2

Elpress for more information

Contact

Hydraulic pumps

PS710

The PS710 is an electrically driven pump for crimping with advanced control and monitoring of crimping progress. A flexible system for a wide range of applications with high performance and reliability for professional use. The pump is suitable for cabling manufacturers as well as for fitters working in the field. The PS710 can be used for all types of crimping or cutting. The PS710 has a power source for all types of crimping.

Technical data:

• possibility to use different pressure ranges, 0 - 700 Bar

• oil flow at 20 bar: 0.6 litre/min (PS710D 1.2 litre/min)

• oil volume: 1.0 litre

• oil type: HYDREX MV 22 or similar

• crimps/battery charge: 120 crimps with Cu 150 mm²

• ambient temperature: -22 to 55°C

• protection: IP54

• Li-ion battery 28,8V, 3,0 Ah

• Met CE requirements: Safety of machinery 2006/42/EC, Electromagnetic compatibility 2014/30/EU, Low Voltage Directive 2014/35/EU, ROHS 2014/35/EU, WEEE 2012/19/EU

PS710E

For users working in the distribution network or industry.

Properties:

• small and light weight, which makes the product easy to use in every situation

• maximum performance, can be used both with Li-ion battery 28.8 V or 220V mains power

• LCD Display with keypad for full status information of pump to the fitter

• PC communication via USB

• to be used with crimp heads and cable cutters

• charger 230 VAC 50 Hz, 10.8-28.8 V, charging time 65 min

PS710E251-ERGO-WOBC

Contains:

• pump E-version

• mains cable for EU

• hydraulic hose 2.4 m

• without battery and charger

• carrying strap

• Elpress ergonomic handle ERGO (No Bluetooth)

PS710E251-RAK-WOBC

Contains:

• pump E-version

• mains cable for EU

• hydraulic hose 2.4 m

• without battery and charger

• carrying strap

• Elpress handle straight

PS710E

Name Net weight (kg) Length mm Width Height PS710E 12,0 370 170 280

PS710R

For users looking for a reliable standard product.

Properties:

• pump control without electronic control system, relay controlled

• easily equipped without data communication

• without battery

• to be used with crimp heads and cable cutters

• Elpress ergonomic handle ERGO, with wired communication, can be selected for

Contains:

• pump E-version

• mains cable for EU

• hydraulic hose 5 m

• without battery and charger

• carrying strap

• Elpress ergonomic handle ERGO (No Bluetooth)

Contains:

• pump E-version

• mains cable for EU

• hydraulic hose 5 m

• without battery and charger

• carrying strap

• Elpress handle straight

PS710R

Name Net weight (kg) Length mm Width Height PS710R 12,0 370 170 280

PS710E501-ERGO-WOBC PS710E501-RAK-WOBC

Accessories for PS710x

Operating handle for operation of pump PS710. Ergonomically designed handle that reduces the load on the operator at the workstation. EERGO is wired. Available in different designs depending on the length of the hydraulic hose.

Battery powered cable cutter

PKL54C

Electric cable cutter for cutting Cu and Al cable, max. cutting diameter 54 mm.

Properties:

• not intended for cutting steel

• comes in a bag with Li-ion battery, 14.4 V, as well as charger

• tool performs a scissor motion when cutting that provides an optimal cut surface

• built-in fuse as a surge protector

• CE-marked

Name Net weight (kg) Note Pcs/ pack HYD.SLANG KPL. 2,4M ERGO PS710E 2,40 Hydraulic hose (2.4 m) for PS710E, with ERGO handle 1 HYD.SLANG KPL. 5M ERGO PS710E 3,90 Hydraulic hose (5 m) for PS710E, with ERGO handle 1 HYD.SLANG KPL. 2,4M RAK PS710E 2,40 Hydraulic hose (2,4 m) for PS710E, with straight handle 1 HYD.SLANG KPL. 5M RAK PS710E 3,90 Hydraulic hose (5 m) for PS710E, with straight handle 1 HYD.SLANG KPL. 2,4M RAK PS710R 2,40 Hydraulic hose (2,4 m) for PS710E, with straight handle 1 HYD.SLANG KPL. 5M RAK PS710R 3,90 Hydraulic hose (5 m) for PS710E, with straight handle 1 HYD.SLANG KPL. 2,4M ERGO PS710R 2,43 Hydraulic hose (2.4 m) for PS710R, with ERGO handle 1 HYD.SLANG KPL. 5M ERGO PS710R 4,0 Hydraulic hose (5 m) for PS710R, with ERGO handle 1 FCU-PS710R 2,80 Foot pedal for PS710R 1 FCU-PS710D&E 2,80 Foot pedal for PS710D and PS710E 1 BÄRREM (strap) PS710 0,12 Carrying strap for all PS710 versions 1 Max ø conductor Name Net weight (kg) Length mm Width Height Delivered 54 PKL54C 8,60 338 220 120 With charger 230VAC 54 PKL54C-US 7,70 338 22 12 With charger 150VAC 54 PKL54C-WOBC 6,25 338 22 12 Without battery and charger

Battery powered cutting tool PKL54C.

Cable cutter up to ø50 mm

HKS50

Cable cutter for cutting cable up to approx. Ø 50 mm. Cutting tool for steel and Cu/Al cable with interchangeable blades. HKS50 is supplied with universal blade UFE1 for Al/Cu, FeAl line, flexible steel line and anchoring cables. Comes in a sturdy textile bag with instructions for use and cleaning tool for threads.

Properties:

• scissor-motion for the best cut surface on the cut cable

• single-handed operation facilitates installation

• reliable and proven ratchet function

• move blades easily and quickly by releasing two screws

• clearly marked usage area on the blades

Blade for HKS50

Max ø conductor Name Net weight (kg) Length Width Height 50 HKS50 1,44 350 185 60

Max ø conductor Name Net weight (kg) 50 UFE2 0,130 50 UFE1 0,104 30 UFEB 0,111 50 UFE 0,104

Hydraulic cable cutters

A range of cable cutters covering virtually all needs for cutting power cables and OH-line wires.

KL2585

Hydraulic cable cutting head for copper and aluminum cable.

Properties:

• cuts up to 4 x 150 mm² Cu conductor and ø 85 mm Al, paper and plastic insulated conductors (there may be restrictions depending on the conductor’s design and materials)

• cuts steel-reinforced cables, but not steel wire-reinforced cables

• used with foot pump P4000 or electrically powered pump PS710

• supplied in plywood box

HKL40/KL40, HKL55/KL55, HKL85/KL85

A series of cable cutters covering almost all needs when cutting power cables and lines. The cutter heads (KL) are operated with one of Elpress’ pumps, e.g. foot pump P4000 or pump PS710.

Technical Specifications

HKL40 / KL40 / HKL55 / KL55 / HKL85 / KL85

Hydraulic manual cutters HKL40 HKL55 HKL85

Hydraulic cutting heads KL40 KL55 KL85

Max. opening ca ø40 ø55 ø85

Max. cutting force, KN 88 43 55

Max. cutting capacity, examples.

copper cable ca ø40 400 (500) mm² 630 mm²

Cu annealed solid conductor ø20

Cu rod ca ø30

Aluminium cable ca ø40 3x240+95 mm² 3x240+95 mm² 630(800 mm²)

Al annealed solid conductor ø25

ACSR ø40

Al bar ca ø40

Telephone cable ø55

Steel wire (<180daN/mm²) ø11

Steel rod ø18

Does not cut steel wire reinforced cable.

mm² Max ø conductor Name Net weight (kg) Length mm Width Height 630 85 KL2585 10,35 250 377 75

HKL40 and KL40

Max ø conductor Name Net weight (kg) Length mm Width Height 40 HKL40 6,05 645 165 85 55 HKL55 4,13 560 140 55 85 HKL85 7,60 745 190 72 40 KL40 4,70 285 105 85 55 KL55 3,50 300 110 55 85 KL85 6,70 385 170 75

HKL85 and KL85

Our story.

We shall be a leader in our market, through safe and sustainable quality products. Since 1959, we have had an ongoing process of getting better at everything we do. We want our customers to feel confident that our curiosity and passion give us a leading role in creating products that are sustainable and fit the requirements of the future regarding electrification. We strive for our employees to feel proud to be part of our business, which has a rich history but also aims for a developing future.

We know that you can’t just fall back on history and experience, but that you also have to aim upwards and forwards to meet the demands of the future. Our head office is in Sweden, but we are present all over the world with the help of subsidiaries, authorized partners and distributors.

Over the years, we have developed System Elpress, which is a unique system where we focus on safety when it comes to using the right tool for the right connection. System Elpress is represented by Academy, Certification, Consultation and Service. We create security and sustainability in using our products and also to make it possible to create special solutions for our customers.

Certify your team with Elpress Academy.

Every year, we visit multiple companies around the world to educate and train their operators to ensure they have the right knowledge to carry out the crimping correctly. When you choose System Elpress for your crimping requirements we offer training containing both theoretical and practical exercises.

After a completed course, the operators will be awarded a certification. These individuals have demonstrated a skill level necessary to carry out the work in a safe and proper manner when working with crimping in advanced applications. We tailor the training based on your needs and what best suits your organization.

E-mail:

Elpress AB . P.O. Box 186, SE-872 24 KRAMFORS, Sweden

+46 612-71 71 00

Tel:

sales@elpress.se

| www.elpress.net